Bragi Left Dash Wireless Smart Earphone Firmware
Tipo de arquivo: Firmware.
Sistema operacional: AnyOS.
Nome do arquivo: fwthedash_bl.bra.
Bit: 32/64 Bit.
Licença: Grátis.
Descrição
Left Dash
– Remove the Right Dash from The Charger.
– Insert the left Dash in the charger and ensure it is correctly mounted on the MagSnap
– Connect The Charger to the PC with the micro USB cable.
– Press the reset button on The Charger with a short press, about 2 seconds. You can find it on the right side of the Charger (the opposite side of the Mirco-USB-port)
– The Left Dash will mount as a file system with a capacity of approximately 4MB. If it does not mount then remove the Left Dash from the case and reinsert it.
– Copy the left side update file into the root of The Dash file system. Note the left Dash is very slow writing files to its file system, please be patient. It can take 5 minutes to write the file and your PC may give very misleading feedback as it is not used to a file system like this. Just be patient.
– When the copy is done, safely eject The Dash from the PC. It is critical that the firmware update file is copied correctly to the Left Dash.
– Disconnect the charger from USB power and wait. The Dash should start the update within 20 seconds. When the update starts you will see different LED patterns, these are normal, be patient.
– The Dash will blink while the update proceeds, about 5 minutes. If there is no blinking and The Dash continue to breathe regularly, which indicates update did not start, then remove the Left Dash from The Charger for 10 seconds and reinsert it in The Charger so The Dash reset and the update will start.
– When the left Dash returns to breathing remove it from the charger and remove The Charger from USB power.
Install a new software update on The Dash
In case there is a software update available for your Dash, please follow the steps below:
– Click on “Download Update”. The download of the software update to your computer will start automatically.
– A file named fwthedash.bra should now be in your download directory.
– Make sure that the downloaded file has the correct name as stated above.
– Copy and paste the fwthedash.bra file onto »The Dash«.
– Safely eject The Dash from your system as you would safely remove a USB drive.
– Disconnect the USB Cable from your computer. This will trigger the update process.
– When The Dash is updating it will start blinking in a blue color for the duration of the update.
– DO NOT remove The Dash from The Charger until the update is complete.
– The update is finished when both left and right Dash start “breathing” (a slow regular pulsation of the LED LightGuide).
– Your Dash is now updated and ready to be used again. Enjoy!
About Device Firmware:
A aplicação de uma versão de firmware mais recente que a já instalada em sua unidade pode trazer vários aprimoramentos, incluir soluções alternativas para diversos problemas encontrados pelo dispositivo e aprimorar ou adicionar recursos recém-desenvolvidos.
Por outro lado, o downgrade da versão do firmware pode recuperar a funcionalidade do dispositivo no caso de uma atualização de software estar com defeito ou causar queda no desempenho geral da unidade. No entanto, tenha em mente que a aplicação de um firmware mais antigo não é recomendado e nem sempre será possível.
No que diz respeito às etapas de atualização, devido à grande variedade de dispositivos e às inúmeras maneiras de instalar um novo firmware, é recomendável que você leia atentamente e compreenda as etapas de atualização e considere aplicar um firmware somente quando você se familiarizar com o método de atualização.
Como o processo de instalação é na maioria das vezes bastante arriscado, essa etapa deve ser tomada por usuários que tenham a capacidade de concluir com êxito a atualização; usuários regulares podem iniciá-lo por sua conta e risco. Além disso, é melhor que essa tarefa ser executada em um ambiente de energia constante como a assegurada por uma unidade de UPS.
Portanto, se você considerar aplicar esta versão, pressione o botão de download, leve em consideração todos os aspectos mencionados anteriormente e atualize o firmware do dispositivo. Certifique-se também de verificar constantemente o nosso site para garantir que você não perca um único lançamento novo.
Download