Bragi Left Dash Wireless Smart Earphone Firmware
Tipo de archivo: Firmware.
Sistema Operativo: AnyOS.
Nombre del archivo: fwthedash_bl.bra.
Bit: 32/64 Bit.
Licencia: Gratuito.
Descripción
Left Dash
– Remove the Right Dash from The Charger.
– Insert the left Dash in the charger and ensure it is correctly mounted on the MagSnap
– Connect The Charger to the PC with the micro USB cable.
– Press the reset button on The Charger with a short press, about 2 seconds. You can find it on the right side of the Charger (the opposite side of the Mirco-USB-port)
– The Left Dash will mount as a file system with a capacity of approximately 4MB. If it does not mount then remove the Left Dash from the case and reinsert it.
– Copy the left side update file into the root of The Dash file system. Note the left Dash is very slow writing files to its file system, please be patient. It can take 5 minutes to write the file and your PC may give very misleading feedback as it is not used to a file system like this. Just be patient.
– When the copy is done, safely eject The Dash from the PC. It is critical that the firmware update file is copied correctly to the Left Dash.
– Disconnect the charger from USB power and wait. The Dash should start the update within 20 seconds. When the update starts you will see different LED patterns, these are normal, be patient.
– The Dash will blink while the update proceeds, about 5 minutes. If there is no blinking and The Dash continue to breathe regularly, which indicates update did not start, then remove the Left Dash from The Charger for 10 seconds and reinsert it in The Charger so The Dash reset and the update will start.
– When the left Dash returns to breathing remove it from the charger and remove The Charger from USB power.
Install a new software update on The Dash
In case there is a software update available for your Dash, please follow the steps below:
– Click on «Download Update». The download of the software update to your computer will start automatically.
– A file named fwthedash.bra should now be in your download directory.
– Make sure that the downloaded file has the correct name as stated above.
– Copy and paste the fwthedash.bra file onto »The Dash«.
– Safely eject The Dash from your system as you would safely remove a USB drive.
– Disconnect the USB Cable from your computer. This will trigger the update process.
– When The Dash is updating it will start blinking in a blue color for the duration of the update.
– DO NOT remove The Dash from The Charger until the update is complete.
– The update is finished when both left and right Dash start «breathing» (a slow regular pulsation of the LED LightGuide).
– Your Dash is now updated and ready to be used again. Enjoy!
About Device Firmware:
Aplicar una versión de firmware más nueva que la que ya está instalada en su unidad puede traer varias mejoras, incluir soluciones para diversos problemas encontrados por el dispositivo, y mejorar o agregar funciones recientemente desarrolladas.
Por otra parte, la degradación de la versión del firmware puede recuperar la funcionalidad del dispositivo en el caso de que una actualización de software resulte defectuosa o haga que caiga el rendimiento general de la unidad. Sin embargo, tenga en cuenta que la aplicación de un firmware anterior no se recomienda y es posible que no siempre sea posible.
Cuando se trata de los pasos de actualización, debido a la gran variedad de dispositivos y las numerosas formas de instalar un nuevo firmware, se recomienda que lea atentamente y comprenda los pasos de la actualización, y considere aplicar un Firmware solo cuando se haya familiarizado con el método de actualización.
Como la mayoría de las veces el proceso de instalación es bastante arriesgado, este paso debe ser realizado por usuarios que tienen la capacidad de completar con éxito la actualización; Los usuarios regulares pueden iniciarlo bajo su propio riesgo. Además, es mejor que esta tarea se realice en un entorno de energía estable como el que garantiza una unidad UPS.
Por lo tanto, si considera aplicar esta versión, presione el botón de descarga, tenga en cuenta todos los aspectos mencionados y actualice el firmware del dispositivo. También asegúrese de consultar constantemente con nuestro sitio web para asegurarse de no perderse un solo lanzamiento nuevo.
Descargar