Bragi Left Dash Wireless Smart Earphone Firmware
Dateityp: Firmware.
Betriebssystem: AnyOS.
Dateiname: fwthedash_bl.bra.
Bit: 32/64 Bit.
Lizenz: Kostenlos.
Beschreibung
Left Dash
– Remove the Right Dash from The Charger.
– Insert the left Dash in the charger and ensure it is correctly mounted on the MagSnap
– Connect The Charger to the PC with the micro USB cable.
– Press the reset button on The Charger with a short press, about 2 seconds. You can find it on the right side of the Charger (the opposite side of the Mirco-USB-port)
– The Left Dash will mount as a file system with a capacity of approximately 4MB. If it does not mount then remove the Left Dash from the case and reinsert it.
– Copy the left side update file into the root of The Dash file system. Note the left Dash is very slow writing files to its file system, please be patient. It can take 5 minutes to write the file and your PC may give very misleading feedback as it is not used to a file system like this. Just be patient.
– When the copy is done, safely eject The Dash from the PC. It is critical that the firmware update file is copied correctly to the Left Dash.
– Disconnect the charger from USB power and wait. The Dash should start the update within 20 seconds. When the update starts you will see different LED patterns, these are normal, be patient.
– The Dash will blink while the update proceeds, about 5 minutes. If there is no blinking and The Dash continue to breathe regularly, which indicates update did not start, then remove the Left Dash from The Charger for 10 seconds and reinsert it in The Charger so The Dash reset and the update will start.
– When the left Dash returns to breathing remove it from the charger and remove The Charger from USB power.
Install a new software update on The Dash
In case there is a software update available for your Dash, please follow the steps below:
– Click on „Download Update“. The download of the software update to your computer will start automatically.
– A file named fwthedash.bra should now be in your download directory.
– Make sure that the downloaded file has the correct name as stated above.
– Copy and paste the fwthedash.bra file onto »The Dash«.
– Safely eject The Dash from your system as you would safely remove a USB drive.
– Disconnect the USB Cable from your computer. This will trigger the update process.
– When The Dash is updating it will start blinking in a blue color for the duration of the update.
– DO NOT remove The Dash from The Charger until the update is complete.
– The update is finished when both left and right Dash start „breathing“ (a slow regular pulsation of the LED LightGuide).
– Your Dash is now updated and ready to be used again. Enjoy!
About Device Firmware:
Das Anwenden einer neueren Firmware-Version als der bereits auf Ihrem Gerät installierten kann verschiedene Verbesserungen bringen, Problemumgehungen für verschiedene Probleme des Geräts beinhalten und neu entwickelte Funktionen verbessern oder hinzufügen.
Auf der anderen Seite kann durch ein Downgrade der Firmware-Version die Funktionalität des Geräts wiederhergestellt werden, wenn eine Softwareaktualisierung fehlschlägt oder die Gesamtleistung des Geräts beeinträchtigt wird. Beachten Sie jedoch, dass das Anwenden einer älteren Firmware nicht empfohlen wird und möglicherweise nicht immer möglich ist.
In Bezug auf die Aktualisierungsschritte wird aufgrund der Vielzahl der Geräte und der zahlreichen Möglichkeiten zur Installation einer neuen Firmware empfohlen, die Aktualisierungsschritte sorgfältig zu lesen und zu verstehen und eine andere Vorgehensweise in Betracht zu ziehen Firmware nur, wenn Sie sich mit der Update-Methode vertraut gemacht haben.
Da der Installationsvorgang in den meisten Fällen sehr riskant ist, sollte dieser Schritt von Benutzern ausgeführt werden, die in der Lage sind, das Update erfolgreich abzuschließen. regelmäßige Benutzer können es auf eigenes Risiko initiieren. Darüber hinaus ist es am besten, diese Aufgabe in einer stabilen Stromumgebung auszuführen, wie sie von einer USV-Einheit gewährleistet wird.
Wenn Sie diese Version installieren möchten, klicken Sie auf die Schaltfläche zum Herunterladen, berücksichtigen Sie alle oben genannten Aspekte und aktualisieren Sie die Firmware des Geräts. Überprüfen Sie auch ständig unsere Website, um sicherzustellen, dass Sie keine neue Version verpassen.
Download