Bragi Left Dash Wireless Smart Earphone Oprogramowanie
Typ pliku: Oprogramowanie.
System Operacyjny: AnyOS.
Nazwa pliku: fwthedash_bl.bra.
Bit: 32/64 Bit.
Licencja: Darmowa.
Opis
Left Dash
– Remove the Right Dash from The Charger.
– Insert the left Dash in the charger and ensure it is correctly mounted on the MagSnap
– Connect The Charger to the PC with the micro USB cable.
– Press the reset button on The Charger with a short press, about 2 seconds. You can find it on the right side of the Charger (the opposite side of the Mirco-USB-port)
– The Left Dash will mount as a file system with a capacity of approximately 4MB. If it does not mount then remove the Left Dash from the case and reinsert it.
– Copy the left side update file into the root of The Dash file system. Note the left Dash is very slow writing files to its file system, please be patient. It can take 5 minutes to write the file and your PC may give very misleading feedback as it is not used to a file system like this. Just be patient.
– When the copy is done, safely eject The Dash from the PC. It is critical that the firmware update file is copied correctly to the Left Dash.
– Disconnect the charger from USB power and wait. The Dash should start the update within 20 seconds. When the update starts you will see different LED patterns, these are normal, be patient.
– The Dash will blink while the update proceeds, about 5 minutes. If there is no blinking and The Dash continue to breathe regularly, which indicates update did not start, then remove the Left Dash from The Charger for 10 seconds and reinsert it in The Charger so The Dash reset and the update will start.
– When the left Dash returns to breathing remove it from the charger and remove The Charger from USB power.
Install a new software update on The Dash
In case there is a software update available for your Dash, please follow the steps below:
– Click on „Download Update”. The download of the software update to your computer will start automatically.
– A file named fwthedash.bra should now be in your download directory.
– Make sure that the downloaded file has the correct name as stated above.
– Copy and paste the fwthedash.bra file onto »The Dash«.
– Safely eject The Dash from your system as you would safely remove a USB drive.
– Disconnect the USB Cable from your computer. This will trigger the update process.
– When The Dash is updating it will start blinking in a blue color for the duration of the update.
– DO NOT remove The Dash from The Charger until the update is complete.
– The update is finished when both left and right Dash start „breathing” (a slow regular pulsation of the LED LightGuide).
– Your Dash is now updated and ready to be used again. Enjoy!
About Device Firmware:
Zastosowanie nowszej wersji oprogramowania układowego niż ta, która jest już zainstalowana na urządzeniu, może przynieść różne ulepszenia, w tym obejścia różnych problemów napotykanych przez urządzenie, a także ulepszyć lub dodać nowo opracowane funkcje.
Z drugiej strony obniżenie wersji oprogramowania sprzętowego może przywrócić funkcjonalność urządzenia w przypadku, gdy aktualizacja oprogramowania albo okaże się wadliwa, albo spowoduje spadek ogólnej wydajności urządzenia. Należy jednak pamiętać, że stosowanie starszego oprogramowania układowego nie jest zalecane i nie zawsze jest możliwe.
Jeśli chodzi o kroki aktualizacji, ze względu na dużą różnorodność urządzeń i liczne sposoby instalowania nowego oprogramowania układowego, zaleca się uważne przeczytanie i zrozumienie kroków aktualizacji i rozważenie zastosowania innego oprogramowanie układowe tylko po zapoznaniu się z metodą aktualizacji.
Ponieważ proces instalacji jest w większości przypadków dość ryzykowny, ten krok powinien zostać wykonany przez użytkowników, którzy mają możliwość pomyślnego ukończenia aktualizacji; zwykli użytkownicy mogą go inicjować na własne ryzyko. Ponadto najlepiej jest wykonać to zadanie w stabilnym środowisku zasilania, takim jak to zapewnione przez jednostkę UPS.
Dlatego, jeśli rozważysz zastosowanie tego wydania, naciśnij przycisk pobierania, weź pod uwagę wszystkie wyżej wymienione aspekty i zaktualizuj oprogramowanie sprzętowe urządzenia. Upewnij się również, że stale sprawdzasz na naszej stronie internetowej, czy nie przegapisz ani jednej nowej wersji.
Pobierz