Nikon Z 50 Camera Firmware 2.00 için macOS
Dosya tipi: Firmware.
Işleti̇m Si̇stemi: Mac.
Dosya adı: F-Z50-V200M.dmg.
Bit: 32/64 Bit.
Li̇sans: Ücretsiz.
Açıklama
değişiklikler:
– With the addition of an Animal detection on option to Custom Setting a2 (Auto-area AF face/eye detection), face/eye-detection AF is now available with dogs and cats; when this option is enabled, the camera will now detect the eyes and faces of dogs and cats (in movie mode, only faces are detected). Animal detection on is selected automatically when the mode dial is in the SCN (scene mode) position with Pet portrait selected.
– Added support for Nikon Z mount TC-1.4x/TC-2.0x teleconverters.
– Added support for F mount lens firmware updates. F mount lens firmware updates are supported from FTZ mount adapter firmware version 1.10.
– Changed some of the f/-number values displayed when exposure is adjusted in steps of 1/3 EV (f/1.2 is now displayed as f/1.3). As of July 21, 2020, this applies to NIKKOR Z 58mm f/0.95 S Noct lenses.
– The bracketing increment is now properly applied to photos taken with exposure locked during AE bracketing in Continuous H (extended) release mode.
– Release-priority is now enabled if AF-S Single AF is selected for Focus mode when AF-ON is assigned to the AE-L/AF-L button.
The following improvements have been made to subject tracking:
– Users can now switch between the auto-area AF and target selection displays using a custom control such as the Fn1 button.
– The behavior of subject tracking when AF-C is selected during still photography now more closely resembles that for 3D-tracking on digital SLR cameras.
– The conditions for displaying the prompt suggesting the use of the flash have been reviewed and the prompt is now displayed under more appropriate conditions.
Aşağıdaki sorunlar düzeltildi:
– The crop selected for “tall” (portrait-orientation) pictures using PictBridge would not be accurately reflected in the printed image.
– In rare circumstances, autofocus would not engage if a NIKKOR Z DX 16–50mm f/3.5–6.3 VR lens was extended at the same time the camera was turned on.
Camera Firmware Sürümünü Görüntüleme:
– Kamerayı aç.
– Kamera MENU düğmesine basın ve kamera üretici yazılımı sürümünü görüntülemek için KURULUM MENÜSÜ’nde Yazılım versiyonu öğesini seçin.
– Kamera sabit yazılımının sürümünü kontrol edin.
– Kamerayı kapat.
Kamera Ürün Yazılımını Güncelleme:
– Bilgisayarın sabit diskinde bir klasör oluşturun ve istediğiniz şekilde adlandırın.
– Download the file to the folder newly-created.
– Extract the file to a folder named “Z50Update”
– Using a card slot or card reader, copy the .bin to a memory card that has been formatted in the camera.
– Note: Be sure to copy the firmware to the root (top-most) directory of the memory card. The camera will not recognize the new firmware if it is placed in a folder under the root directory.
– Insert the memory card into the camera and turn the camera on.
– SETUP MENU içinde Firmware sürümünü seçin ve bellenim güncellemesini tamamlamak için ekrandaki talimatları izleyin.
– Güncelleme tamamlandıktan sonra, kamerayı kapatın ve hafıza kartını çıkarın.
– Bellenimin yeni sürüme güncellendiğini doğrulayın.
İndirme