Nikon Z 50 Camera Firmware 2.00 für macOS
Dateityp: Firmware.
Betriebssystem: Mac.
Dateiname: F-Z50-V200M.dmg.
Bit: 32/64 Bit.
Lizenz: Kostenlos.
Beschreibung
Änderungen:
– With the addition of an Animal detection on option to Custom Setting a2 (Auto-area AF face/eye detection), face/eye-detection AF is now available with dogs and cats; when this option is enabled, the camera will now detect the eyes and faces of dogs and cats (in movie mode, only faces are detected). Animal detection on is selected automatically when the mode dial is in the SCN (scene mode) position with Pet portrait selected.
– Added support for Nikon Z mount TC-1.4x/TC-2.0x teleconverters.
– Added support for F mount lens firmware updates. F mount lens firmware updates are supported from FTZ mount adapter firmware version 1.10.
– Changed some of the f/-number values displayed when exposure is adjusted in steps of 1/3 EV (f/1.2 is now displayed as f/1.3). As of July 21, 2020, this applies to NIKKOR Z 58mm f/0.95 S Noct lenses.
– The bracketing increment is now properly applied to photos taken with exposure locked during AE bracketing in Continuous H (extended) release mode.
– Release-priority is now enabled if AF-S Single AF is selected for Focus mode when AF-ON is assigned to the AE-L/AF-L button.
The following improvements have been made to subject tracking:
– Users can now switch between the auto-area AF and target selection displays using a custom control such as the Fn1 button.
– The behavior of subject tracking when AF-C is selected during still photography now more closely resembles that for 3D-tracking on digital SLR cameras.
– The conditions for displaying the prompt suggesting the use of the flash have been reviewed and the prompt is now displayed under more appropriate conditions.
Die folgenden Probleme wurden behoben:
– The crop selected for “tall” (portrait-orientation) pictures using PictBridge would not be accurately reflected in the printed image.
– In rare circumstances, autofocus would not engage if a NIKKOR Z DX 16–50mm f/3.5–6.3 VR lens was extended at the same time the camera was turned on.
Anzeigen der Firmware-Version der Kamera:
– Schalten Sie die Kamera ein.
– Drücken Sie die MENU-Taste der Kamera und wählen Sie Firmware-Version im SETUP-MENÜ, um die Firmware-Version der Kamera anzuzeigen.
– Überprüfen Sie die Firmware-Version der Kamera.
– Schalten Sie die Kamera aus.
Aktualisieren der Kamera-Firmware:
– Erstellen Sie einen Ordner auf der Festplatte des Computers und benennen Sie ihn wie gewünscht.
– Download the file to the folder newly-created.
– Extract the file to a folder named “Z50Update”
– Using a card slot or card reader, copy the .bin to a memory card that has been formatted in the camera.
– Note: Be sure to copy the firmware to the root (top-most) directory of the memory card. The camera will not recognize the new firmware if it is placed in a folder under the root directory.
– Insert the memory card into the camera and turn the camera on.
– Wählen Sie Firmware-Version im SETUP-MENÜ und befolgen Sie die Anweisungen auf dem Bildschirm, um das Firmware-Update abzuschließen.
– Wenn das Update abgeschlossen ist, schalten Sie die Kamera aus und entfernen Sie die Speicherkarte.
– Vergewissern Sie sich, dass die Firmware auf die neue Version aktualisiert wurde.
Download