Xwrt-Vortex Firmware 380.57_0 için Huawei WS880
Dosya tipi: Firmware.
Işleti̇m Si̇stemi: AnyOS.
Dosya adı: WS880_380.57_0.zip.
Bit: 32/64 Bit.
Li̇sans: Ücretsiz.
Açıklama
Xwrt-Vortex is a port of Asuswrt-Merlin for different routers developed by Vortex. Xwrt-Vortex retains all the features of the original stock Asus firmware.
Installation:
Simply flash it like any regular update. Fabrika ayarlarına sıfırlamanız gerekmez. You can revert back to an original Asus firmware at any time just by flashing a firmware downloaded from Asus’s website.
NOTE
: resetting to factory default after flashing is strongly recommended for the following cases:
– Updating from a firmware version that is more than 3 releases older
– Switching from a Tomato/DD-WRT/OpenWRT firmware
If upgrading from anything older and you experience issues, then consider doing a factory default reset then as well. Always read the changelog, as mandatory resets will be mentioned there when they are necessary.
In all of these cases, do NOT load a saved copy of your settings! This would be the same thing as NOT resetting at all, as you will simply re-enter any invalid setting you wanted to get rid of. Make sure to create a new backup of your settings after reconfiguring.
Changes
:
– NEW: Merged with 380_1031 GPL
– NEW: Added RT-AC3100 and RT-AC5300 support
– NEW: Added RT-AC68U HW Revision C1 support
– NEW: Backup/Restore of the content of the JFFS partition (under Administration Restore/Save Settings)
– NEW: Added DNSSEC support. Can be enabled under LAN -> DHCP.
– NEW: Added custom/postconf support for igmpproxy.conf.
– CHANGED: Increased user account limit from 16 to 32 on the VPN server pages.
– CHANGED: Updated e2fsprogs to 1.42.13
– CHANGED: Increased maximum entries in Parental Control (time scheduler) to 32.
– CHANGED: Updated miniupnpd to 1.9.20151119.
– CHANGED: Updated Openssl to 1.0.2e.
– CHANGED: Downgraded Dropbear to 2014.66, too many issues in the newer releases.
– CHANGED: Improvements to VPN Status page
– FIXED: CTF not automatically disabled when enabling IP Traffic.
– FIXED: Openvpn clients 3 through 5 were all run on the first CPU core. They are now properly alternated like the first two (odd on CPU1, even on CPU0)
– FIXED: smb.log generated by network map could fill up RAM
– FIXED: upnpc_xml.log generated by miniupnpc could fill up RAM
– FIXED: Inconsistent names used on IP Traffic and Sysinfo page. Now, we give priority to any description manually entered on the network map, followed by static hostname, then any current (lease) hostname.
– FIXED: MAC queries sent to the OUI database were broken due to changes on the IEEE website
– FIXED: Applying changes to OpenVPN client page would start the client even if it was disabled/stopped.
İndirme