Roland A-49 Keyboard Firmware 1.30
Dosya tipi: Firmware.
Işleti̇m Si̇stemi: AnyOS.
Dosya adı: a49_sys_v130.zip.
Bit: 32/64 Bit.
Li̇sans: Ücretsiz.
Açıklama
The following bugs were fixed.:
– The S1 and S2 buttons do not light when they are set to “Latched.”
– Calibration failure of the bender lever.
Additional Functions:
– Bus-powered operation from the front USB connector of the INTEGRA-7 is available.
* The front USB connector of the INTEGRA-7 supplies power only. The MIDI signal cannot be transmitted. You must connect the MIDI OUT connector of the A-49 and the MIDI IN connector of the INTEGRA-7 using a MIDI cable for play.
Procedure for the update
1. While holding down [ TRANSPOSE ] and [ OCTAVE + ], connect the USB COMPUTER connector on the rear panel to a USB connector on the computer. OCTAVE + flashes.
2. Double-click “UpdSMF” displayed on the screen to start the UpdSMF.
3. Set MIDI Out Device to A Series Keyboard.
4. Click [ Path ] (click [ Select… ] for Mac) on “UpdSMF” and specify the location where the update file (_0000001.mid) is from SMF Path (SMF Folder for Mac). Then, click the [ OK ] button.
5. Click [ Scan SMF ] (unnecessary for Mac) to check that the update file (_0000001.mid) is displayed in the file list.
6. Click Send. Sending of the update program starts. After about 2 minute, the update finishes, and [ OCTAVE + ] and the octave indicator on the A-49 flash in alternation.
7. Click [ OK ] on the Send SMF/Complete dialog box (the Complete Update dialog box for Mac) of “UpdSMF”.
8. Click [ Exit ] (click [ Quit ] for Mac) of the “UpdSMF” to exit “UpdSMFJ”.
9. Detach the USB cable, then without pressing any buttons, reattach it. The unit starts up in the normal mode. * If the update fails, the unit starts up in the Update mode instead of the normal mode.
10. Execute a factory reset.
– Press FUNCTION.
– At the keyboard, press the key labeled FACT RESET.
– At the keyboard, press the key labeled ENTER. The factory reset is executed, and parameters that have been set in the Function mode are reset to their factory-default values.
İndirme