Point Grey Flea3 USB3 Vision Camera Firmware 2.7.3.0
Dosya tipi: Firmware.
Işleti̇m Si̇stemi: AnyOS.
Dosya adı: FL3-U3-2.7.3-00.zip.
Bit: 32/64 Bit.
Li̇sans: Ücretsiz.
Açıklama
Düzeltmeler:
Resolved Issues:
– 27728 – Add USB3 Vision support for all FL3-U3 models
– 26021 – Shutter allowed to be set beyond maximum value (IMX035/36 V1.1)
– 20857 – Incorrect shutter time after enabling absolute mode (VITA1300 V1.1)
ERRATA LIST (list of known issues with this version):
– 27287 – Improve brightness functionality in binning (Fmt7Mode4) mode
– 26314 – Firmware Downgrade Using USB2 Will Fail (all models)
– 24806 – CRC in chunk is constant and incorrect
Firmware update:
1. Install FlyCapture2 for either windows or linux.
2. Plug your camera(s) in. Cameras must show up in FlyCapture2. If they do not show up, install FlyCapture2.X and the associated drivers (if applicable) and ensure cameras are visible in FlyCap2 demo.
3. Run UpdatorGUI2.exe or UpdatorGUI3.exe (depending on version of FlyCapture2.X) installed in your bin/bin64 folder:
On 32 bit Windows: C:\Program Files\Point Grey Research\FlyCapture2\bin
On 64 bit Windows: C:\Program Files\Point Grey Research\FlyCapture2\bin64
4. Select the camera(s) to update, point to the .ezm2 file downloaded with this package, and select “Update”.
Camera(s) should now be updated. Please note a power cycle of the cameras should not be required, as they are automatically rebooted after firmware update.
İndirme