Parrot Bebop Drone Firmware 3.1.0
Dosya tipi: Firmware.
Işleti̇m Si̇stemi: AnyOS.
Dosya adı: updater_payload.plf.
Bit: 32/64 Bit.
Li̇sans: Ücretsiz.
Açıklama
Improvements
– Improved recording duration
– Improved video framing
– Flight Radius Limiter : Drone will fly in a restricted radius
– Improved Flight Plan Capabilities
Drone orientation when leaving waypoint
Flight Plan can be paused during a panorama
Take off events in the timeline must be preceded by a landing
Pause timer management
Default camera tilt
– Landing can now be interrupted
Fixed issues
– [General] Minor bug fixes
To update your Bebop 2 via USB, use:
– a micro-USB flash drive (not supplied)
– or a USB flash drive with a female USB/micro-USB cable (not supplied)
1. Connect your USB flash drive to a computer.
Make sure that your USB flash drive is formatted to FAT32 and not NTFS and that it has no other plf file. The procedure to format a USB flash drive to FAT32 depends on your operating system. Usually, you have to right-click on your USB flash drive.
2. Download the update.
The .plf file is the update file you have to install on your Bebop 2. It is important not to confuse it with a .pdf file opening in Adobe Reader.
3. Move the update file to the root of your USB device. Do not place the update file in any directory.
4. Do not rename the file.
Connect the USB or micro USB Flash drive to your Bebop 2.
> The update starts automatically. Your Bebop 2reboots automatically.
To confirm the Bebop 2 is correctly updated, launch the FreeFlight 3 application.
Press Free Flight,
Go into the Settings menu
Version number is displayed in the general information menu
İndirme