Panasonic WV-X8570N Network Camera Firmware 1.10
Dosya tipi: Firmware.
Işleti̇m Si̇stemi: AnyOS.
Dosya adı: x8570_110ES.zip.
Bit: 32/64 Bit.
Li̇sans: Ücretsiz.
Açıklama
Changes:
– Camera may restart by both network disk recorder with “SD memory backup” enabled or and image management software (WV-ASM series) are in sequence mode simultaneously.
– Camera may restart by downloading the data that backed up onto SD memory card.
– Recording may not stop at communication restoration. In a case the communication state is unstable
Updating a camera’s firmware
– Download the latest firmware file and save it on your PC.
– Click the [Maintenance] tab.
– On the left side of the screen under [Maintenance], click [Update Firmware].
– Click [Update Firmware]. The camera will automatically restart.
– After the camera restarts, a dialog prompts you to select the firmware file.
– Click [Browse…]. A dialog prompts you to specify the location of the firmware file.
– Select the firmware file you downloaded from the Panasonic Network Camera website and click [Open]. The selected file name is displayed.
– Confirm the file name, then click [Update Firmware].
– The [Updating firmware.] screen is displayed, and then the [Restarting now…] screen is displayed.
– When the firmware update is complete, the camera’s top page is displayed.
– You can confirm the camera’s firmware version on the top page.
– Confirm the camera’s new firmware version on the top page.
– Do not turn off the power during a firmware update.
– All images buffered in the internal memory are deleted when the firmware is updated.
– All alarm logs are deleted when the firmware is updated.
– You can also use the Setup Program to update the camera’s firmware.
– The camera’s current firmware version can be confirmed on the [Top] page and the [Status] page.
– It might take ten minutes or more to update the firmware according to the network conditions.
İndirme