ICARUS Reader Omnia G2 Firmware 1.0.2_20120913
Dosya tipi: Firmware.
Işleti̇m Si̇stemi: Windows 7, Windows 8, Windows 8.1, Windows Vista, Windows XP.
Dosya adı: Omnia 201405 and later firmware package.zip.
Bit: 64 Bit.
Li̇sans: Ücretsiz.
Açıklama
NOT:
– Omnia 201405 and later firmware package
To upgrade the firmware of your ICARUS Omnia, do the following:
1. Bellenim yükseltmesini ICARUS web sitesinden indirin. Üçüncü taraf web sitelerinden yükseltmeleri asla yüklemeyin, bu garantinizi geçersiz kılacaktır. You can find the upgrade files in the Downloads Section of the website. Click on the image of the ICARUS Omnia to open the downloads for this product. If there are no files here it means that no firmware upgrade is available yet.
2. WinZip veya 7Zip gibi bir açma aracı kullanarak dosyayı bilgisayarınızdaki bir klasöre açın. Muhtemelen bunu işletim sisteminizin işlevselliğiyle bile yapabilirsiniz, ancak bu bilgisayarınızın yüklü olduğu işletim sistemi sürümüne bağlıdır.
3. İndirme paketinde 3 dosya var:
1) bu talimatlar
2) * .img uzantılı bir dosya ve
3) the application LiveSuitPack_v1.07.
4. Run the LiveSuitPack_v1.07 application. This will unzip all files inside this archive to the current folder
5. In this folder there are several driver installation files with the names drvinstaller_IA64, drvinstaller_X64, drvinstaller_X86. If your operating system is Windows XP or lower, do not do anything with these files. If your computer’s operating system is Windows 7 32-bit, run drvinstaller_X86. If your operating system is Windows 7 64-bit, run drvinstaller_X64.
6. Run the application LiveSuit.exe
7. Press the button to select the actual firmware file. This file ends with the extension *.img and is found in the folder that you unzipped the firmware download package to 8. Now connect the ICARUS Omnia e-reader via the USB cable 9. Wait until the Omnia’s screen shows that there is a USB connection (“USB Connected”)
10. Click on the “Settings” button to install the firmware. In the pop-up screen that now opens, select yes.
11. A screen will pop-up.
Select No. This will do an upgrade without formatting the e-reader’s memory.
12. The e-reader will start upgrading, a progress bar will show the progress. Upgrading will take a couple of minutes 13. After a few minutes the update is complete.
14. The upgrade is now finished and the the e-reader will restart
15. After a firmware upgrade you will have to select your default language again
16. Your e-reader is now ready for use again!
İndirme