ICARUS Reader Omnia G2 Firmware 1.0.2_20120913
Tipo de arquivo: Firmware.
Sistema operacional: Windows 7, Windows 8, Windows 8.1, Windows Vista, Windows XP.
Nome do arquivo: Omnia 201405 and later firmware package.zip.
Bit: 64 Bit.
Licença: Grátis.
Descrição
NOTA:
– Omnia 201405 and later firmware package
To upgrade the firmware of your ICARUS Omnia, do the following:
1. Faça o download da atualização do firmware no site do ICARUS. Nunca instale atualizações de sites de terceiros, isso invalidará sua garantia. You can find the upgrade files in the Downloads Section of the website. Click on the image of the ICARUS Omnia to open the downloads for this product. If there are no files here it means that no firmware upgrade is available yet.
2. Descompacte o arquivo em uma pasta no seu computador usando uma ferramenta de descompactação como o WinZip ou o 7Zip. Possivelmente você pode fazer isso mesmo com a funcionalidade do seu sistema operacional, mas isso depende da versão do sistema operacional que seu computador instalou.
3. Existem 3 arquivos no pacote de download:
1) estas instruções
2) um arquivo com a extensão * .img e
3) the application LiveSuitPack_v1.07.
4. Run the LiveSuitPack_v1.07 application. This will unzip all files inside this archive to the current folder
5. In this folder there are several driver installation files with the names drvinstaller_IA64, drvinstaller_X64, drvinstaller_X86. If your operating system is Windows XP or lower, do not do anything with these files. If your computer’s operating system is Windows 7 32-bit, run drvinstaller_X86. If your operating system is Windows 7 64-bit, run drvinstaller_X64.
6. Run the application LiveSuit.exe
7. Press the button to select the actual firmware file. This file ends with the extension *.img and is found in the folder that you unzipped the firmware download package to 8. Now connect the ICARUS Omnia e-reader via the USB cable 9. Wait until the Omnia’s screen shows that there is a USB connection (“USB Connected”)
10. Click on the “Settings” button to install the firmware. In the pop-up screen that now opens, select yes.
11. A screen will pop-up.
Select No. This will do an upgrade without formatting the e-reader’s memory.
12. The e-reader will start upgrading, a progress bar will show the progress. Upgrading will take a couple of minutes 13. After a few minutes the update is complete.
14. The upgrade is now finished and the the e-reader will restart
15. After a firmware upgrade you will have to select your default language again
16. Your e-reader is now ready for use again!
Download