Hasselblad H3DII-50 Digital Back Firmware R370
Dosya tipi: Firmware.
Işleti̇m Si̇stemi: AnyOS.
Dosya adı: firmware_R370.cim.
Bit: 32/64 Bit.
Li̇sans: Ücretsiz.
Açıklama
This package contains firmware version R370 for H4D-40, H4D-50, H4D-50MS, H3DII-50, H3DII-50MS, H4D-200MS & CFV50.
Düzeltmeler:
– Desteği UDMA7 CF cards (up to 128 GB)
– Solves a possible problem with a faint magenta cast on long exposures with CFV-50
– Improved stability in the Multi-shot sequence
Kurulum adımları:
1. İndirilen dosyayı çıkartın.
2. Make sure your camera is turned on.
3. Connect your complete camera, including the capture unit, lens and viewfinder to Phocus.
4. Go to “File” and then “Update Firmware” and locate the desired firmware package (firmware_R370.cim) on your computer, and click “Update”.
5. Follow the instructions provided from the software carefully! Do not switch off the camera during the update process, unless specifically requested by the Phocus software.
6. When the update has been finalized, please restart your camera and check that the firmware has been successfully updated.
Önemli uyarı:
– During the upgrade procedure do NOT disconnect the FireWire cable until prompted!
– Firmware indirme prosedürü sırasında FireWire kablosunun istemeden çıkarılması, en kötü durumda kamerayı işe yaramaz hale getirebilir, bu da yetkili servis ihtiyacını gerektirir.
-Manual updating of firmware is available in the Phocus software, from version 2.7 Mac and 2.7 Windows. However, please use the latest version of Phocus for firmware updating. For Windows it is strongly recommended to use the 64 bit version.
İndirme