Hasselblad H3DII-50 Digital Back Firmware R370
Dateityp: Firmware.
Betriebssystem: AnyOS.
Dateiname: firmware_R370.cim.
Bit: 32/64 Bit.
Lizenz: Kostenlos.
Beschreibung
This package contains firmware version R370 for H4D-40, H4D-50, H4D-50MS, H3DII-50, H3DII-50MS, H4D-200MS & CFV50.
Fixes:
– Unterstützung für UDMA7 CF cards (up to 128 GB)
– Solves a possible problem with a faint magenta cast on long exposures with CFV-50
– Improved stability in the Multi-shot sequence
Installationsschritte:
1. Entpacken Sie die heruntergeladene Datei.
2. Make sure your camera is turned on.
3. Connect your complete camera, including the capture unit, lens and viewfinder to Phocus.
4. Go to „File“ and then „Update Firmware“ and locate the desired firmware package (firmware_R370.cim) on your computer, and click „Update“.
5. Follow the instructions provided from the software carefully! Do not switch off the camera during the update process, unless specifically requested by the Phocus software.
6. When the update has been finalized, please restart your camera and check that the firmware has been successfully updated.
Wichtiger Hinweis:
– During the upgrade procedure do NOT disconnect the FireWire cable until prompted!
– Das unbeabsichtigte Entfernen des FireWire-Kabels während des Firmware-Download-Vorgangs kann die Kamera im schlimmsten Fall unbrauchbar machen, was autorisierten Service erforderlich machen würde.
-Manual updating of firmware is available in the Phocus software, from version 2.7 Mac and 2.7 Windows. However, please use the latest version of Phocus for firmware updating. For Windows it is strongly recommended to use the 64 bit version.
Download