Foscam FI8907W IP Camera Firmware 11.22.2.51
Dosya tipi: Firmware.
Işleti̇m Si̇stemi: AnyOS.
Dosya adı: MJPEG-indoor-fixed-camera-11.25.2.51.zip.
Bit: 32/64 Bit.
Li̇sans: Ücretsiz.
Açıklama
New features:
1) Add a new feature to enable and disable Manufacturer’s DDNS.
2) Add WPS feature;
3) Add Russian, Korean, Indonesian, Danish, Czech, Turkish;
4) Disable UPNP in default factory settings;
5). Enhance security to prompt user change the default blank login password;
Fixed bugs:
1). Fix several vulnerabilities to improve security;
Note:
After upgrading to this version, it cannot downgrade to previous versions
How to upgrade firmware for Indoor PT camera
Preparation for upgrading:
1) Plug in the Ethernet cable to upgrade firmware, not via wireless.
2) Upgrade the system firmware firstly and web UI secondly.
3) Keep power on during the upgrading.
Method 1:
Upgrade firmware on IP Camera Tool
Step 1: Highlight and right click the camera and then go to Upgrade Firmware.
Step 2: Enter the user and password of camera. The default user is ‘admin’ and password is blank.
Step 3: Update System Firmware. Click Upgrade System Firmware select system firmware click Open. After reboot, the system firmware is loaded successfully.
Step 4: Upgrade Web UI. Repeat step and 2. Click Upgrade WEB UI select Web UI firmware click Open. After reboot, the Web UI is loaded successfully.
Step 5: You can check new firmware on Basic Properties. Highlight and right click the camera and then go to Basic Properties.
Method 2:
Update firmware on Upgrade Device Firmware.
Step 1: Log into camera, click Device Management Upgrade Device Firmware.
Step 2: Update System firmware. Click Browse select system firmware click Open click Submit. After reboot, the system firmware is loaded successfully.
Step 3: Update Web UI firmware. Click Browse select Web UI firmware click Open click Submit.
After reboot, the Web UI is loaded successfully.
Step 4: You can check new firmware on Device Status page.
İndirme