Dynaudio Xeo 2 Speaker Firmware 1.34
Dosya tipi: Firmware.
Işleti̇m Si̇stemi: AnyOS.
Dosya adı: xeo2134w.zip.
Bit: 32/64 Bit.
Li̇sans: Ücretsiz.
Açıklama
TThis is a stability release with no new features, introducing some important bugfixes. We encourage all owners to update to this release for the best experience.
This release includes these improvements:
– Fixed a bug where one speaker would randomly lock up during wireless playback, and needing a reset to reconnect
– Fixed a bug where the volume control would sometimes become unsynchronized after extended periods of playing
– Fixed a bug where one speaker would not connect when changing from local input to Connect/Hub
Dynaudio Focus XD firmware update instructions
1. Unzip the downloaded Zip file
2. Copy the *.bin firmware file onto the USB stick.
3. Switch OFF the loudspeaker with the rear panel switch.
4. Insert the USB stick into the USB port at the rear panel labeled Service.
5. Switch ON the loudspeaker with the rear panel switch.
6. The loudspeaker will automatically upload the firmware from the USB stick.
7. Important: After this, allow the speaker to install the full update during the next 1-3 minutes. DO NOT POWER OFF THE SPEAKERS.
8. During this update the white LED’s will blink slowly, filling up from the bottom.
9. After installation, the speaker will return to standby.
10. Firmware update procedure is now finished, and the USB stick can be removed.
Please note: The firmware update must be performed on both speakers! 11. After firmware update is completed, disconnect and reconnect power to the speaker. The speaker will search the environment for about 40 seconds, during which the LED is blinking red.
Please Note: Step 11 must be repeated if you change the transmission setting or Channel ID on a Dynaudio Connect.
İndirme