DJI Matrice 100 Drone Firmware Zenmuse X3 1.3.1.00
Dosya tipi: Firmware.
Işleti̇m Si̇stemi: AnyOS.
Dosya adı: MATRICE100_FW_V01.03.01.00.zip.
Bit: 32/64 Bit.
Li̇sans: Ücretsiz.
Açıklama
What’s New
Firmware:
– Improved SDK data transmission stability.
– Improved gimbal control accuracy.
– Fixed issue of occasional over-discharge when the Intelligent Flight Battery has not been used for more than 90 days.
Notes
– DJI Assistant 2 must be upgraded to the latest version.
– Both the aircraft and the remote controller must be upgraded to the latest version or else they will not link.
– You are advised to update all your Intelligent Flight Batteries with this firmware update package.
– This firmware can be downgraded to v1.2.0.80 only.
How to Upgrade the Firmware
Upgrading the Aircraft and Battery Firmware
If you are using the DJI Zenmuse X3 or X5 Series gimbal and camera:
Step 1 – Check the battery level and Micro SD card storage
– Make sure the Intelligent Flight Battery has at least a 50% charge.
– Make sure that the Micro SD card has 100MB of free space.
Step 2 – Prepare the firmware Update package
1. Bellenimi indirin update package
2. Extract all files to the root directory of your Micro SD card.
3. With the aircraft powered off, insert your Micro SD card into the camera.
Step 3 – Run the upgrade
1. With the remote controller turned off, power on the aircraft. The firmware upgrade will begin automatically.
2. Wait about 25 minutes for the upgrade to complete. The aircraft will beep “D-D-D-D” while upgrading, and beep “D—DD” when the upgrade is complete.
3. Confirm the upgrade result by opening the “.txt” file generated in the root directory of your Micro SD card. You will see the text “result: successful” or “result: failed”.
Step 4 – Upgrade any extra batteries
1. Remove the upgraded battery from the aircraft.
2. Insert the extra battery, powered off, into the battery compartment connected to the flight controller.
3. Power on the battery to start.
If you are NOT using the DJI Zenmuse X3 or X5 Series gimbal and camera:
Method 1 – Using the DJI Assistant 2
Connect the aircraft to DJI Assistant 2 to upgrade the firmware. For details, refer to “Using the PC Assistant (P50)” in the DJI Matrice 100 User Manual.
Method 2 – Using the DJI N1 Video Encoder
Bellenimi indirin update package
Upgrading the Remote Controller Firmware
The System Status bar in the DJI GO app (center top of the camera view screen) will flash several times if a firmware upgrade is available.
Step 1- Check your devices
Make sure:
– Remote controller has at least a 50% charge.
– Mobile device is connected to the internet.
– Mobile device has 30 MB of free space.
Step 2- Run the upgrade
1. Launch DJI GO and tap through “Camera View > System Status Bar > Overall Status”.
2. Tap “Download Firmware” to download the package and upgrade the firmware.
İndirme