D-Link DCS-920 rev. A IP Camera Firmware 1.03
Dosya tipi: Firmware.
Işleti̇m Si̇stemi: AnyOS.
Dosya adı: DCS-920_FIRMWARE_1.03.ZIP.
Bit: 32/64 Bit.
Li̇sans: Ücretsiz.
Açıklama
Sabit Sorunlar
1. Copyright fixed – Change from “Copyright 2007-2008” to “Copyright 2007-2009”.
2. Fixed hangup issue – when repeat to configure the image setup like Flip, mirror, the device will hangup.
3. Fixed hangup problem – when using 3 D-ViewCAMs PC to monitor one IP Camera and also perform the video recording concurrently, the device will hangup during running a period of time.
Yükseltme Talimatları:
Bellenimi yükseltmek için aşağıdaki adımları izleyin:
1. En son üretici yazılımını indirin
dosya. Dosya .bin dosya biçiminde.
2. Kamera web kullanıcı arayüzüne giriş yapın ve kurulum / Bakım / Firmware güncellemesine girin. 3. Gözat… ‘ı tıklayın ve ürün yazılımı dosyasını belirtin.
3. Yükselt düğmesine tıklayın. Kamera yükseltmeye başlar ve yükseltme tamamlandığında otomatik olarak yeniden başlatılır.
How to update your camera firmware:
– Check your connections. Make sure your device is connected to your router with an Ethernet cable for the upgrade process. Do not use a wireless connection when upgrading the firmware.
– Also, make sure you use a computer connected to the same router as your device. Do not perform this process through a remote connection to your device over the Internet.
– Bellenimi indirin to your PC and then unzip it if necessary.
– Open your device’s web interface. To do this run your device’s Setup Wizard and write down the IP Address for your device then write that IP Address into your web browser and login as admin with your password for it.
– Go to MAINTENANCE > Firmware Upgrade to go to the Firmware Upgrade page. Click “Browse” and then select the firmware file you saved and unzipped on your computer in the previous steps.
– After selecting the firmware file, click Upload to start the upgrade process.
– The upgrade process will begin, and will take about 2-3 minutes to complete. Do not start or use other applications while upgrading your device’s firmware, and do not hit Stop, Back, or Reload in your web browser during the upgrade process.
– Once the upgrade process is complete, click on the Firmware Upgrade link on the left to return to the Firmware Upgrade page.
– Verify that the Current Firmware Version matches the version of the firmware you uploaded. The upgrade process is complete, and you can close your web browser.
İndirme