HP ENVY 17m-ce0000 Thunderbolt Firmware 1.0.60.1 para Windows 10 64-bit
Tipo de arquivo: Firmware.
Sistema operacional: Windows 10.
Nome do arquivo: sp98906.exe.
Bit: 64 Bit.
Licença: Grátis.
Descrição
This package provides the HP Thunderbolt Dock G2 Firmware Installer for supported computer models that are running a supported operating system.
This package includes the following firmware:
– Audio Base
– (Optional) Audio DSP
– (Optional) Audio Module
– USB3.1 Gen2 Hub
– DisplayPort Hub
– VGA Port
– Base Microcontroller
– US USB Type-C PD Controller
– DS USB Type-C PD Controller
– (Optional) Audio Module Microcontroller
– Thunderbolt Controller
Alterar:
– Fixes an issue where the display is unstable when a certainDP2HDMI dongle is used with 4K60Hz DSC input only.
– Causes a DisplayPort monitor connected to the dock to run in HDMImode if the monitor EDID indicates it is an HDMI type but has noCEA extension block.
– Adds a workaround for certain sources that set input stream to 8bpc when the GPU enables HDR but has no VSC SDP packet and msa BPCis set to 6.
– Provides support to switch back to HDCP22 mode when the source is attempting to perform HDCP22 authentication after HDCP1.4 authentication has previously be performed.
– Resets the ESM (HDCP22 IP) block if there is no response.
– Adds a workaround for HPZR30W monitor DP input.
– Adds a workaround for LG5K monitor.
– Adds support for the GPU to switch the DSC ON/OFF on the same monitor.
– Extends the time allowed to select the minimal Display Port transmitter (DPTx) link rate based on timing requirements.
Se tiver sido instalado, a atualização (sobrescrever-instalar) poderá corrigir problemas, adicionar novas funções ou expandir as já existentes. Mesmo que outros SOs também sejam compatíveis, não recomendamos aplicar este release em plataformas diferentes das especificadas.
Para instalar este pacote, faça o seguinte:
– Certifique-se de que todos os requisitos do sistema sejam atendidos.
– Salve o pacote para download em um local acessível (como sua área de trabalho).
– Localize e clique duas vezes no arquivo recém-baixado.
– Permitir que o Windows execute o arquivo (se necessário).
– Leia o EULA (Contrato de Licença de Usuário Final) e concorde em prosseguir com o processo de instalação.
– Siga as instruções na tela.
– Feche o assistente e execute uma reinicialização do sistema para permitir que as alterações entrem em vigor.
Download