HP ENVY 17m-ce0000 Thunderbolt Firmware 1.0.60.1 per Windows 10 64-bit
Tipo di file: Firmware.
Sistema Operativo: Windows 10.
Nome del file: sp98906.exe.
Bit: 64 Bit.
Licenza: Gratis.
Descrizione
This package provides the HP Thunderbolt Dock G2 Firmware Installer for supported computer models that are running a supported operating system.
This package includes the following firmware:
– Audio Base
– (Optional) Audio DSP
– (Optional) Audio Module
– USB3.1 Gen2 Hub
– DisplayPort Hub
– VGA Port
– Base Microcontroller
– US USB Type-C PD Controller
– DS USB Type-C PD Controller
– (Optional) Audio Module Microcontroller
– Thunderbolt Controller
I cambiamenti:
– Fixes an issue where the display is unstable when a certainDP2HDMI dongle is used with 4K60Hz DSC input only.
– Causes a DisplayPort monitor connected to the dock to run in HDMImode if the monitor EDID indicates it is an HDMI type but has noCEA extension block.
– Adds a workaround for certain sources that set input stream to 8bpc when the GPU enables HDR but has no VSC SDP packet and msa BPCis set to 6.
– Provides support to switch back to HDCP22 mode when the source is attempting to perform HDCP22 authentication after HDCP1.4 authentication has previously be performed.
– Resets the ESM (HDCP22 IP) block if there is no response.
– Adds a workaround for HPZR30W monitor DP input.
– Adds a workaround for LG5K monitor.
– Adds support for the GPU to switch the DSC ON/OFF on the same monitor.
– Extends the time allowed to select the minimal Display Port transmitter (DPTx) link rate based on timing requirements.
Se è stato installato, l’aggiornamento (sovrascrittura-installazione) può risolvere problemi, aggiungere nuove funzioni o espandere quelle esistenti. Anche se altri sistemi operativi potrebbero essere anche compatibili, non è consigliabile applicare questa versione su piattaforme diverse da quelle specificate.
Per installare questo pacchetto, fai quanto segue:
– Assicurarsi che tutti i requisiti di sistema siano soddisfatti.
– Salva il pacchetto scaricabile su un percorso accessibile (come il desktop).
– Individuare e fare doppio clic sul file appena scaricato.
– Consenti a Windows di eseguire il file (se necessario).
– Leggere l’EULA (Contratto di licenza con l’utente finale) e accettare di procedere con il processo di installazione.
– Segui le istruzioni sullo schermo.
– Chiudere la procedura guidata ed eseguire un riavvio del sistema per consentire alle modifiche di avere effetto.
Download