Nikon D6 Camera Firmware 1.10
Tipo di file: Firmware.
Sistema Operativo: Windows 10, Windows 8, Windows 8.1.
Nome del file: F-D6-V110W.exe.
Bit: 64 Bit.
Licenza: Gratis.
Descrizione
I cambiamenti:
– Users can now choose the band (2.4 or 5 GHz) for the host SSID when connecting to wireless networks via a WT-6 wireless transmitter attached to the camera. The band is listed in Connection Wizard network-selection dialog and post-connection in the Wired LAN/WT display.
– Autofocus for viewfinder photography has been improved.
– Focus-point selection now works smoothly even if the user abruptly switches directions on the multi selector or sub-selector.
Risolti i seguenti problemi:
– Autofocus sometimes produced unpredictable results when used with certain AF-S lenses with maximum apertures faster than f/2.8.
– Instead of flashing, the network indicator would remain lit when an Ethernet connection was established.
– The WT-6 wireless transmitter could not be used to join wireless networks with SSIDs containing a space, semicolon (“;”), ampersand (“&”), or backslash (“”).
– The over- and under-exposure indicators in the viewfinder were reversed when +0- was selected for Custom Setting f9 (Reverse indicators) in the CUSTOM SETTING MENU.
– The exposure indicators were slow to refresh when shutter speed, aperture, or ISO sensitivity were adjusted using the main- or sub-command dial.
– If, when Focus point and AF-area mode was selected for Custom Setting a5 (Store points by orientation) in the CUSTOM SETTING MENU, the standby timer expired with the camera in portrait (tall) orientation and the camera was then rotated to landscape (wide) orientation before the standby timer was reactivated, the camera would not restore the AF-area mode previously selected for landscape orientation, but would instead switch to the AF-area mode selected when the camera was in portrait orientation.
– The following would not be immediately updated to reflect the true number of exposures remaining after pictures were deleted: the number of exposures remaining shown in the top control panel when the camera was off, and the frame-count display in the rear control panel when Frame count was selected for Custom Setting d12 (Rear control panel) in the CUSTOM SETTING MENU.
– The AF fine-tuning options item could be used to store only one set of fine-tuning values for AF-S NIKKOR 180-400mm f/4E TC1.4 FL ED VR lenses: users could store either values for use with the built-in teleconverter or values for use without, but not both.
Visualizzazione della versione del firmware della fotocamera:
– Accendi la fotocamera.
– Premere il pulsante MENU della fotocamera e selezionare Versione firmware nel SETUP MENU per visualizzare la versione del firmware della fotocamera.
– Controllare la versione del firmware della fotocamera.
– Spegnere la fotocamera.
Aggiornamento del firmware della fotocamera:
– Creare una cartella sul disco rigido del computer e nominarla come desiderato.
– Salva il file scaricabile nella cartella appena creata.
– Run the package to extract a .bin file (the camera firmware) to a folder named “D6Update”
– Utilizzando uno slot per schede o un lettore di schede, copiare il file .bin in una scheda di memoria che è stata formattata nella fotocamera.
– Inserire la scheda di memoria nello slot 1 sulla fotocamera e accendere la fotocamera.
– Selezionare Versione firmware nel MENU IMPOSTAZIONI e seguire le istruzioni sullo schermo per completare l’aggiornamento del firmware.
– Al termine dell’aggiornamento, spegnere la fotocamera e rimuovere la scheda di memoria.
– Confermare che il firmware è stato aggiornato alla nuova versione.
Download