Nikon D6 Camera Firmware 1.10
Dateityp: Firmware.
Betriebssystem: Windows 10, Windows 8, Windows 8.1.
Dateiname: F-D6-V110W.exe.
Bit: 64 Bit.
Lizenz: Kostenlos.
Beschreibung
Änderungen:
– Users can now choose the band (2.4 or 5 GHz) for the host SSID when connecting to wireless networks via a WT-6 wireless transmitter attached to the camera. The band is listed in Connection Wizard network-selection dialog and post-connection in the Wired LAN/WT display.
– Autofocus for viewfinder photography has been improved.
– Focus-point selection now works smoothly even if the user abruptly switches directions on the multi selector or sub-selector.
Die folgenden Probleme wurden behoben:
– Autofocus sometimes produced unpredictable results when used with certain AF-S lenses with maximum apertures faster than f/2.8.
– Instead of flashing, the network indicator would remain lit when an Ethernet connection was established.
– The WT-6 wireless transmitter could not be used to join wireless networks with SSIDs containing a space, semicolon (“;”), ampersand (“&”), or backslash (“”).
– The over- and under-exposure indicators in the viewfinder were reversed when +0- was selected for Custom Setting f9 (Reverse indicators) in the CUSTOM SETTING MENU.
– The exposure indicators were slow to refresh when shutter speed, aperture, or ISO sensitivity were adjusted using the main- or sub-command dial.
– If, when Focus point and AF-area mode was selected for Custom Setting a5 (Store points by orientation) in the CUSTOM SETTING MENU, the standby timer expired with the camera in portrait (tall) orientation and the camera was then rotated to landscape (wide) orientation before the standby timer was reactivated, the camera would not restore the AF-area mode previously selected for landscape orientation, but would instead switch to the AF-area mode selected when the camera was in portrait orientation.
– The following would not be immediately updated to reflect the true number of exposures remaining after pictures were deleted: the number of exposures remaining shown in the top control panel when the camera was off, and the frame-count display in the rear control panel when Frame count was selected for Custom Setting d12 (Rear control panel) in the CUSTOM SETTING MENU.
– The AF fine-tuning options item could be used to store only one set of fine-tuning values for AF-S NIKKOR 180-400mm f/4E TC1.4 FL ED VR lenses: users could store either values for use with the built-in teleconverter or values for use without, but not both.
Anzeigen der Firmware-Version der Kamera:
– Schalten Sie die Kamera ein.
– Drücken Sie die MENU-Taste der Kamera und wählen Sie Firmware-Version im SETUP-MENÜ, um die Firmware-Version der Kamera anzuzeigen.
– Überprüfen Sie die Firmware-Version der Kamera.
– Schalten Sie die Kamera aus.
Aktualisieren der Kamera-Firmware:
– Erstellen Sie einen Ordner auf der Festplatte des Computers und benennen Sie ihn wie gewünscht.
– Speichern Sie die herunterladbare Datei in dem neu erstellten Ordner.
– Run the package to extract a .bin file (the camera firmware) to a folder named “D6Update”
– extrahieren.Kopieren Sie die .bin-Datei über einen Kartensteckplatz oder einen Kartenleser in eine Speicherkarte, die in der Kamera formatiert wurde.
– Setzen Sie die Speicherkarte in Steckplatz 1 der Kamera ein und schalten Sie die Kamera ein.
– Wählen Sie Firmware-Version im SETUP-MENÜ und befolgen Sie die Anweisungen auf dem Bildschirm, um das Firmware-Update abzuschließen.
– Wenn das Update abgeschlossen ist, schalten Sie die Kamera aus und entfernen Sie die Speicherkarte.
– Vergewissern Sie sich, dass die Firmware auf die neue Version aktualisiert wurde.
Download