Nikon D6 Camera Firmware 1.10
Tipo de archivo: Firmware.
Sistema Operativo: Windows 10, Windows 8, Windows 8.1.
Nombre del archivo: F-D6-V110W.exe.
Bit: 64 Bit.
Licencia: Gratuito.
Descripción
Cambios:
– Users can now choose the band (2.4 or 5 GHz) for the host SSID when connecting to wireless networks via a WT-6 wireless transmitter attached to the camera. The band is listed in Connection Wizard network-selection dialog and post-connection in the Wired LAN/WT display.
– Autofocus for viewfinder photography has been improved.
– Focus-point selection now works smoothly even if the user abruptly switches directions on the multi selector or sub-selector.
Se corrigieron los siguientes problemas:
– Autofocus sometimes produced unpredictable results when used with certain AF-S lenses with maximum apertures faster than f/2.8.
– Instead of flashing, the network indicator would remain lit when an Ethernet connection was established.
– The WT-6 wireless transmitter could not be used to join wireless networks with SSIDs containing a space, semicolon (“;”), ampersand (“&”), or backslash (“”).
– The over- and under-exposure indicators in the viewfinder were reversed when +0- was selected for Custom Setting f9 (Reverse indicators) in the CUSTOM SETTING MENU.
– The exposure indicators were slow to refresh when shutter speed, aperture, or ISO sensitivity were adjusted using the main- or sub-command dial.
– If, when Focus point and AF-area mode was selected for Custom Setting a5 (Store points by orientation) in the CUSTOM SETTING MENU, the standby timer expired with the camera in portrait (tall) orientation and the camera was then rotated to landscape (wide) orientation before the standby timer was reactivated, the camera would not restore the AF-area mode previously selected for landscape orientation, but would instead switch to the AF-area mode selected when the camera was in portrait orientation.
– The following would not be immediately updated to reflect the true number of exposures remaining after pictures were deleted: the number of exposures remaining shown in the top control panel when the camera was off, and the frame-count display in the rear control panel when Frame count was selected for Custom Setting d12 (Rear control panel) in the CUSTOM SETTING MENU.
– The AF fine-tuning options item could be used to store only one set of fine-tuning values for AF-S NIKKOR 180-400mm f/4E TC1.4 FL ED VR lenses: users could store either values for use with the built-in teleconverter or values for use without, but not both.
Viendo la versión de firmware de la cámara:
– Enciende la cámara.
– Presione el botón MENÚ de la cámara y seleccione Versión de firmware en el MENÚ DE CONFIGURACIÓN para mostrar la versión del firmware de la cámara.
– Verifique la versión del firmware de la cámara.
– Apague la cámara.
Actualización del firmware de la cámara:
– Cree una carpeta en el disco duro de la computadora y asígnele el nombre que desee.
– Guarde el archivo descargable en la carpeta recién creada.
– Run the package to extract a .bin file (the camera firmware) to a folder named “D6Update”
– Con una ranura para tarjeta o un lector de tarjetas, copie el archivo .bin a una tarjeta de memoria que ha sido formateada en la cámara.
– Inserte la tarjeta de memoria en la Ranura 1 de la cámara y encienda la cámara.
– Seleccione la versión de Firmware en el MENÚ DE CONFIGURACIÓN y siga las instrucciones en pantalla para completar la actualización del firmware.
– Una vez que se complete la actualización, apague la cámara y retire la tarjeta de memoria.
– Confirme que el firmware se ha actualizado a la nueva versión.
Descargar