Argus 125 Voice Tester Firmware 2.24
Type de fichier: Firmware.
Système d’exploitation: AnyOS.
Nom de fichier: 021_ARGUS-125_Firmware_U_V_2_24.zip.
Bit: 32/64 Bit.
Licence: Gratuit.
Description
Important information on updating your ARGUS firmware:
– Never under any circumstances update ARGUS when it is operating in battery mode.
– Connect ARGUS to the power adapter before uploading the update file from the PC.
– An ARGUS USB cable is required for updating (USB cable with mini-USB plug).
– You should back up the configuration and measurement logs to a PC before performing an update.
– Do not disconnect ARGUS from the PC during the update.
– Do not switch off ARGUS during the update.
– Be sure to observe the messages in the ARGUS display, and not just the instructions of the update tool on the PC.
– The update is only complete when the update tool displays the corresponding message on the PC and ARGUS starts with the « normal » startup screen after being restarted by the update tool.
– ARGUS only powers back up when you click one of the two buttons (« Back to step 1 » or « Exit program ») at the end of the update.
REMARQUE:
– If problems occur because of a failure to follow these instructions, repeat the update process up to three times. Each repetition makes it possible to overwrite further faulty software components.
– When connecting an ARGUS Copper Box, it can occur that ARGUS automatically initializes the Copper Box with the correct firmware in order to avoid compatibility issues. This can take a moment.
Télécharger