Argus 125 Voice Tester Firmware 2.24
Tipo de arquivo: Firmware.
Sistema operacional: AnyOS.
Nome do arquivo: 021_ARGUS-125_Firmware_U_V_2_24.zip.
Bit: 32/64 Bit.
Licença: Grátis.
Descrição
Important information on updating your ARGUS firmware:
– Never under any circumstances update ARGUS when it is operating in battery mode.
– Connect ARGUS to the power adapter before uploading the update file from the PC.
– An ARGUS USB cable is required for updating (USB cable with mini-USB plug).
– You should back up the configuration and measurement logs to a PC before performing an update.
– Do not disconnect ARGUS from the PC during the update.
– Do not switch off ARGUS during the update.
– Be sure to observe the messages in the ARGUS display, and not just the instructions of the update tool on the PC.
– The update is only complete when the update tool displays the corresponding message on the PC and ARGUS starts with the “normal” startup screen after being restarted by the update tool.
– ARGUS only powers back up when you click one of the two buttons (“Back to step 1” or “Exit program”) at the end of the update.
NOTA:
– If problems occur because of a failure to follow these instructions, repeat the update process up to three times. Each repetition makes it possible to overwrite further faulty software components.
– When connecting an ARGUS Copper Box, it can occur that ARGUS automatically initializes the Copper Box with the correct firmware in order to avoid compatibility issues. This can take a moment.
Download