SweetPea SP3-200 MediaPlayer Firmware 1.01.06
Tipo de archivo: Firmware.
Sistema Operativo: AnyOS.
Nombre del archivo: UPGRADE.hex.
Bit: 32/64 Bit.
Licencia: Gratuito.
Descripción
This firmware provides the following fixes and enhancements:
– solves battery not charging problem
– solves problem with player locking up
– significantly increases play time on a battery charge
– reduces brightness of backlight. Dims backlight 10 seconds after last button pressed. Turns off backlight 45 seconds after last button pressed.
– certain .m4a songs no longer cause the player to lock up
– goes straight back to play mode after selecting playlist
– prevents player waking up unexpectedly
– solves problem with clock resetting to 12:00PM
– adds power down option on power button
– adds firmware and model information in the device menu
Who should update
Everyone with an SP3-200 (including newly shipped units directly from the factory). (Note this is NOT applicable to the SP3R-200)
Update Procedure
The update procedure depends on whether or not your player is being recognized by your computer.
Follow either section A or section B below.
A. Follow these instructions to update your SweetPea3 if your computer recognizes the device when it is plugged in.
1 – Back up your songs. Create a folder on your desktop and drag all the folders from the SweetPea3 to this folder.
2 – Descargue el firmware file (.hex) to your computer. This file must be called UPGRADE.HEX. Do not rename it. Do not try to run this program, you just need to download it to your computer.
3 – Plug the SweetPea3 to your computer and copy the downloaded file (UPGRADE.HEX) to any location on the SweetPea3.
4 – Unplug the SweetPea3. Enter the settings menu on the device (long press on the middle button). Select Device Settings > Auto Upgrade. Let it go through the process. The player will eventually reset itself and power up.
5 – If the player is not powering up after the update, try pressing the reset button by inserting a paper clip in the small hole above the volume buttons.
B. Follow these instructions to update your SweetPea3 if your computer does not recognize the device when it is plugged in. Note this can only be done on a PC and is not Mac compatible.
1 – Descargue el firmware file (.fw) and save it somewhere on your computer. Do not try to run this program, you just need to download it to your computer.
2 – Download the updater program (.zip) and save it somewhere on your computer.
3 – Open the zip file and run the setup.exe. Follow the onscreen instructions to install the program.
4 – When done, run the program by clicking on the Windows Start button (lower left corner of your screen). Select All Programs > Action Tools > Audio Product Tool 1.03 > Audio Product Tool
5 – Select the firmware file you downloaded in Step 1 above. Click Replace
6 – Uncheck Flash Erase
7 – While holding down the Volume Down button on your SweetPea3, plug in the SweetPea3 to your computer. Release the button.
8 – Click the onscreen Down button when it is enabled. If the button is not enabled, try resetting the unit (paper clip in hole about volume buttons) while holding down the Volume Down button.
9 – Allow the software to program the SweetPea3 and unplug it when finished updating. Note that your battery may require charging. If the update fails, unplug the SweetPea3 and try again from step 7.
10 – If the player is not powering up after the update, try pressing the reset button by inserting a paper clip in the small hole above the volume buttons.
About Media Player Firmware:
La instalación de una actualización de firmware para su reproductor multimedia mejora la experiencia general del usuario al agregar nuevas funciones, corregir errores y mejorar la compatibilidad de su dispositivo para reproducir diversos formatos de contenido de audio y video.
Al actualizar su Media Player, puede prolongar la vida útil del dispositivo porque, de esta manera, estará sincronizado con los nuevos estándares de la industria para la creación de contenido.
Sin embargo, el proceso de actualización de su dispositivo es riesgoso si no se realiza de acuerdo con instrucciones estrictas, tales como: asegúrese de que el firmware que ha descargado sea compatible con su dispositivo, y no interfiera con el reproductor durante la proceso de actualización
El método más común para actualizar su reproductor multimedia es mediante una memoria USB o un DVD de actualización. Aunque este proceso es muy sencillo, cada dispositivo tiene ciertas particularidades que debe tener en cuenta.
Si considera usar esta actualización para su Media Player, no dude en hacer clic en el botón de descarga, instalar el firmware y disfrutar. Visite nuestro sitio web con la mayor frecuencia posible para mantener su reproductor multimedia actualizado con el último software y firmware.
Descargar