SweetPea SP3-200 MediaPlayer Firmware 1.01.06
Tipo di file: Firmware.
Sistema Operativo: AnyOS.
Nome del file: UPGRADE.hex.
Bit: 32/64 Bit.
Licenza: Gratis.
Descrizione
This firmware provides the following fixes and enhancements:
– solves battery not charging problem
– solves problem with player locking up
– significantly increases play time on a battery charge
– reduces brightness of backlight. Dims backlight 10 seconds after last button pressed. Turns off backlight 45 seconds after last button pressed.
– certain .m4a songs no longer cause the player to lock up
– goes straight back to play mode after selecting playlist
– prevents player waking up unexpectedly
– solves problem with clock resetting to 12:00PM
– adds power down option on power button
– adds firmware and model information in the device menu
Who should update
Everyone with an SP3-200 (including newly shipped units directly from the factory). (Note this is NOT applicable to the SP3R-200)
Update Procedure
The update procedure depends on whether or not your player is being recognized by your computer.
Follow either section A or section B below.
A. Follow these instructions to update your SweetPea3 if your computer recognizes the device when it is plugged in.
1 – Back up your songs. Create a folder on your desktop and drag all the folders from the SweetPea3 to this folder.
2 – Scarica il firmware file (.hex) to your computer. This file must be called UPGRADE.HEX. Do not rename it. Do not try to run this program, you just need to download it to your computer.
3 – Plug the SweetPea3 to your computer and copy the downloaded file (UPGRADE.HEX) to any location on the SweetPea3.
4 – Unplug the SweetPea3. Enter the settings menu on the device (long press on the middle button). Select Device Settings > Auto Upgrade. Let it go through the process. The player will eventually reset itself and power up.
5 – If the player is not powering up after the update, try pressing the reset button by inserting a paper clip in the small hole above the volume buttons.
B. Follow these instructions to update your SweetPea3 if your computer does not recognize the device when it is plugged in. Note this can only be done on a PC and is not Mac compatible.
1 – Scarica il firmware file (.fw) and save it somewhere on your computer. Do not try to run this program, you just need to download it to your computer.
2 – Download the updater program (.zip) and save it somewhere on your computer.
3 – Open the zip file and run the setup.exe. Follow the onscreen instructions to install the program.
4 – When done, run the program by clicking on the Windows Start button (lower left corner of your screen). Select All Programs > Action Tools > Audio Product Tool 1.03 > Audio Product Tool
5 – Select the firmware file you downloaded in Step 1 above. Click Replace
6 – Uncheck Flash Erase
7 – While holding down the Volume Down button on your SweetPea3, plug in the SweetPea3 to your computer. Release the button.
8 – Click the onscreen Down button when it is enabled. If the button is not enabled, try resetting the unit (paper clip in hole about volume buttons) while holding down the Volume Down button.
9 – Allow the software to program the SweetPea3 and unplug it when finished updating. Note that your battery may require charging. If the update fails, unplug the SweetPea3 and try again from step 7.
10 – If the player is not powering up after the update, try pressing the reset button by inserting a paper clip in the small hole above the volume buttons.
About Media Player Firmware:
L’installazione di un aggiornamento del firmware per il tuo Media Player migliora l’esperienza generale dell’utente aggiungendo nuove funzionalità, correggendo bug e migliorando la compatibilità del tuo dispositivo, al fine di riprodurre vari formati di contenuti audio e video.
Aggiornando il tuo Media Player, puoi effettivamente prolungare la vita del dispositivo perché, in questo modo, sarà in sincrono con i nuovi standard del settore per la creazione di contenuti.
Tuttavia, il processo di aggiornamento del dispositivo è rischioso se non eseguito secondo istruzioni rigorose, come ad esempio: assicurarsi che il firmware scaricato sia compatibile con il dispositivo e non interferire con il lettore durante il processo di aggiornamento.
Il metodo più comune per aggiornare il tuo Media Player è usare una chiavetta USB o aggiornare il DVD. Sebbene questo processo sia molto semplice, ogni dispositivo ha alcune particolarità che è necessario tenere in considerazione.
Se pensi di utilizzare questo aggiornamento per il tuo lettore multimediale, sentiti libero di fare clic sul pulsante di download, installare il firmware e divertirti. Controlla il nostro sito Web il più spesso possibile per mantenere aggiornato il tuo lettore multimediale con il software e il firmware più recenti.
Download