FUJINON XF200mmF2 R LM OIS WR Lens Firmware 1.01
Tipo de archivo: Firmware.
Sistema Operativo: AnyOS.
Nombre del archivo: XFUP0033.DAT.
Bit: 32/64 Bit.
Licencia: Gratuito.
Descripción
Cambios:
– Fix of minor bugs
Precauciones
– Si falla la actualización del firmware, es posible que la cámara ya no funcione correctamente en algunos casos. Carefully read the notes provided here.
– Use siempre la batería completamente cargada cuando actualice el firmware de manera básica. Nunca apague la cámara ni intente utilizar ninguno de los controles de la cámara mientras se sobrescribe el firmware.
– You can update the firmware from old version directly to the latest one.
– Firmware updating requires approximately 60 seconds.
– Una vez que el firmware se ha actualizado, algunos datos de la versión anterior no se pueden restaurar.
– Please check here if you encounter any problems.
Procedimiento de actualización de firmware:
– Encienda la cámara.
– Press «MENU/OK» button and select «FORMAT» in the SET-UP menu.
– Press the selector button(up) to select «OK» and press the «MENU/OK» button.
– Then, the format will start.
– Turn the camera off after the format is completed.
– Put the formatted memory card to a card reader slot of your PC.
– Descargue el firmware and copy it to the card.
– Tome la tarjeta de la ranura del lector de tarjetas después de que se complete la copia y colóquela en la cámara.
– Encienda la cámara presionando el botón «DISP / BACK» para mostrar la pantalla a la derecha. Luego, presione el botón «MENÚ / OK»
– Select the item into [LENS] to update the XF lens.
– Presione el botón [OK] para ir al siguiente paso.
– Presione el botón [ARRIBA] para seleccionar «OK».
– Press the [OK] button and wait.
– The firmware update has been successfully completed.
– Turn the camera off
– Verifique el firmware actualizado.
– Formatee la tarjeta.
Descargar