Thecus N8910 NAS Server Firmware 3.02.03 Beta
Dosya tipi: Firmware.
Işleti̇m Si̇stemi: AnyOS.
Dosya adı: Thecus_x86_64_FW.3.02.03.
Bit: 32/64 Bit.
Li̇sans: Ücretsiz.
Açıklama
[New Features/Changes]
– Add Local User with admin permission able to modify LCM password.
– Add unarousable for HOME folder under SAMBA.
[Function improved]
– Improve Access Log response time.
– Improve CONF.BIN schedule backup
– Improve icon display.
– Improve Intel security.
– Improve IPv6 display from WEB UI.
– Improve Kernel to 4.4
– Improve local user naming without -(dash).
– Improve N4810 HDMI display while booting.
– Improve RAID6 Expand
[Online Auto Download & Upgrade]
– If NAS with Internet access capacity, it is no need to download this file, just: CONTROL PANEL -> CONTROL -> FIRMWARE SETTING -> AUTO UPGRADE-> LATEST->CHECK UPGRADE NOW.
Upgrade firmware:
– Save the downloadable file on your computer.
– Login as admin from web interface to your Thecus NAS with 64bit firmware.
– In the [System Management] menu, choose the [Firmware upgrade] item and the firmware upgrade.
– Press button and select the firmware you downloaded.
– Press [Apply] and the confirm window will pop up. Please select [Next] button twice to confirm the process, and start firmware upgrade. The entire upgrade takes about 3 minutes. After the firmware is upgraded, Thecus NAS will beep for 3 seconds.
– NOT: If your browser is set to cache the screen, please press CTRL-F5 in your browser to reload from server instead of from browser’s cache.
– During firmware upgrade process, you will see a progress bar indicating the completeness.
– NOT: During firmware upgrade process, it is imperative that user do not turn off the power to Thecus NAS or close the browser. This will lead to catastrophic result.
– Just in case, the upgrade process failed, please DO NOT restart or shutdown the NAS. Go back and upgrade the firmware again.
– After the firmware is upgraded, you will see a message ask admin user to reboot. Please reboot to finish the upgrade process.
– After click [Reboot], the system will redirect to [Shutdown / Reboot] page, you may select the NAS to shutdown or reboot.
– NOT: After reboot the Thecus NAS, please go to [System Management > Config Mgmt] to save your configuration. New version of firmware will not work with configuration file from previous versions of firmware.
İndirme