Strymon TimeLine Pedal Firmware 1.23
Dosya tipi: Firmware.
Işleti̇m Si̇stemi: AnyOS.
Dosya adı: timeline_firmware_1v23.zip.
Bit: 32/64 Bit.
Li̇sans: Ücretsiz.
Açıklama
What’s New:
– Preset naming
Display an (optionally) scrolling 16 character preset name, or the bank number
– Global Tap tempo
Keep the most recently tapped tempo across all of your presets
– 5 second Spillover
Once you’ve played for at least 5 seconds on a patch, the current sound will spill over when you change to a new patch
– Tap averaging
Tap tempo now averages your taps to more easily zero in on the desired tempo. Some have better rhythm than others
– Kill dry
Mutes your dry signal for use in a parallel effects loop
– Looper Undo to initial loop & Redo
Undo all overdubs and revert to the first recorded loop. Redo will bring back the recorded overdubs.
– New dedicated MIDI CC for Bypass
Bypass or Engage TimeLine via MIDI regardless of which preset you are currently on
– Also … new MIDI CCs for Looper Level, Looper Undo, Looper Redo, and Infinite Repeats
– Loop transitions are now smoother
– Ability to record 100% wet with the looper
– Save to MIDI patch number – when a MIDI program change message is received during a save, the patch will automatically be saved to that location.
– Some miscellaneous “under the hood” bugs were also addressed with this update.
How to Update Your Pedal
Once your MIDI interface has been configured, you are now ready to update your Strymon pedal. Before proceeding with the following steps, make sure that your Strymon pedal is connected to your computer with a dedicated MIDI interface and that your Librarian software is open.
– Navigate to View > Software Update at the top of your window or screen.
– Click on “Install the Update”.
– After the update has successfully been installed, click “OK”.
– You can check in the bottom right corner of the Librarian to confirm the update was installed successfully.
İndirme