Panasonic WV-X6531NS Network Camera Firmware 1.70
Dosya tipi: Firmware.
Işleti̇m Si̇stemi: AnyOS.
Dosya adı: x6531_170ES.zip.
Bit: 32/64 Bit.
Li̇sans: Ücretsiz.
Açıklama
Changes/Düzeltmeler:
– Added a support page and so that it possible to access to support page by QR code.
– RTSP distribution abolished the constraint which was only unicast while selecting multicast.
– In CGI command, expanded the parameter of “get_io2”. Added response format “3” so that information on sound detection / command alarm / i-VMD could be acquired.
– In ONVIF, improved accuracy of PTZ value up to 5 decimal places.
– Profile S compliant service on ONVIF, made available for streaming in H.265 settings.
– Added a message in the setting screen for SD memory card; “It is not available when “60fps” is selected for [Image capture mode].”
– Tilt’s coordinates were reversed for ceiling and tabletop installations.
– Changed the hue etc. even if only the brightness were changed.
– Missing display the “VMD / i-VMD” column in i-VMD “Alarm”. In Spanish only.
– The alert message shows “360x or more”. Corrected to be “180x or more”
– Added a message; When using Image capture size of 2048×1536, QVGA, 320×180, the digital zoom may be canceled at 360x or more. As a result of cancelling the digital zoom, camera picture may be distorted.
– When setting i-VMD depth, after drawing and registered rectangle, the coordinates of the rectangle would be shifted in the upper left direction when the screen was redisplayed.
– At displaying system log, display the log in two lines. Also display shifting the date and time of occurrence and contents column each other. In case outputting log with a long character string.
– Camera may reboot by changing image capture mode. When use with recorder.
– Camera may reboot by accessing with a browser other than Internet Explorer (IE).
– Deleted encryption protocol TLS 1.0 for security purpose
– Improved Auto Focus speed at normal brightness and low light intensity.
– Improved optical zoom speed.
– Improved for the image at the high luminance part not to saturate over when Super Dynamic “On”.
– RTSP connection may be disconnected upon receiving an incorrect RTSP request.
– RSTP connection may be disconnected very rarely by sending RTSP request reception and RTSP response transmission at the same time.
– Improved communication quality on video streaming in H.265/H.264.
Updating a camera’s firmware
– Download the latest firmware file and save it on your PC.
– Click the [Maintenance] tab.
– On the left side of the screen under [Maintenance], click [Update Firmware].
– Click [Update Firmware]. The camera will automatically restart.
– After the camera restarts, a dialog prompts you to select the firmware file.
– Click [Browse…]. A dialog prompts you to specify the location of the firmware file.
– Select the firmware file you downloaded from the Panasonic Network Camera website and click [Open]. The selected file name is displayed.
– Confirm the file name, then click [Update Firmware].
– The [Updating firmware.] screen is displayed, and then the [Restarting now…] screen is displayed.
– When the firmware update is complete, the camera’s top page is displayed.
– You can confirm the camera’s firmware version on the top page.
– Confirm the camera’s new firmware version on the top page.
– Do not turn off the power during a firmware update.
– All images buffered in the internal memory are deleted when the firmware is updated.
– All alarm logs are deleted when the firmware is updated.
– You can also use the Setup Program to update the camera’s firmware.
– The camera’s current firmware version can be confirmed on the [Top] page and the [Status] page.
– It might take ten minutes or more to update the firmware according to the network conditions.
İndirme