Leica M-E (Typ 240) Camera Firmware 2.1.0.0
Dosya tipi: Firmware.
Işleti̇m Si̇stemi: AnyOS.
Dosya adı: M_240-2.1.0.0-CUSTOMER.FW.
Bit: 32/64 Bit.
Li̇sans: Ücretsiz.
Açıklama
Firmware Güncelleme Prosedürü:
– Format an SD memory card in your Leica M.
– Turn off the camera and insert the card into an SD card reader – either integrated or connected to your computer. (A reader is required for Firmware updates).
– Download the Firmware file from the Leica M site using the Service & Support/Support/Downloads menu.
– Save the Firmware file at the top level of the card’s folder structure.
– Remove the card properly from your card reader, insert the card into the camera and close the bottom cover.
– Press the “INFO” button and hold it, simultaneously turn on the camera using the main switch.
– The update process takes several 2-4 minutes. “Loading file…” appears on the screen.
– When the update is done, a corresponding message appears on the screen. The Message disappears after some seconds.
CAUTION:
– Please do not turn off your camera, or do not remove the SD Memory Card, do not remove the lens while updating your camera’s firmware.
– DOING SO CAN CAUSE A SERIOUS DAMAGE TO YOUR CAMERA!
– When installing the new Firmware version, all user profiles will be deleted and need to be set again after the new firmware is installed. We recommend taking note of the specific settings before updating.
– If the battery does not have sufficient charge, you will see a corresponding warning message.
İndirme