Hasselblad H3D-22 Camera Body Firmware 2.3.3
Dosya tipi: Firmware.
Işleti̇m Si̇stemi: AnyOS.
Dosya adı: CB141208.hbf.
Bit: 32/64 Bit.
Li̇sans: Ücretsiz.
Açıklama
This package contains firmware version 2.3.3/16.0.8 for H2D, H3D and H3DII, H4D camera bodies.
Düzeltmeler:
– If the tethered camera was in B or T-mode and exposure mode was changed from Phocus, exposure time on the camera was not updated correctly. This is now fixed
– If the tethered camera was set to pending self-timer and then released from Phocus, the sequence was not handled properly. This is also fixed.
Kurulum adımları:
1. İndirilen dosyayı çıkartın.
2. Make sure your camera is turned on.
3. Connect the camera to Phocus using a POWERED FireWire cable.
4. Go to “File” and then “Update Firmware” and locate the desired firmware package (CB141208.hbf) on your computer, and click “Update”.
5. Follow the instructions provided from the software carefully! Do not switch off the camera during the update process, unless specifically requested by the Phocus software.
6. When the update has been finalized, please restart your camera and check that the firmware has been successfully updated.
Önemli uyarı:
– During the upgrade procedure do NOT disconnect the FireWire cable until prompted!
– Firmware indirme prosedürü sırasında FireWire kablosunun istemeden çıkarılması, en kötü durumda kamerayı işe yaramaz hale getirebilir, bu da yetkili servis ihtiyacını gerektirir.
– Manual updating of firmware is available in the Phocus software, from version 2.7 Mac and 2.7 Windows. However, please use the latest version of Phocus for firmware updating. For Windows it is strongly recommended to use the 64 bit version.
İndirme