Hasselblad CFVII Digital Back Firmware R270
Dosya tipi: Firmware.
Işleti̇m Si̇stemi: AnyOS.
Dosya adı: firmware_270r.cim.
Bit: 32/64 Bit.
Li̇sans: Ücretsiz.
Açıklama
This package contains firmware version R270. CIM for the sensor units on the below listed products. Version R270 is a feature and bugfix release of version R267.
Düzeltmeler:
-Desteği UDMA7 Compact Flash cards (up to 128 GB)
Kurulum adımları:
1. İndirilen dosyayı çıkartın.
2. Make sure your camera is turned on.
3. Connect your complete camera, including the capture unit, lens and viewfinder to Phocus using a POWERED FireWire cable.
4. Go to “File” and then “Update Firmware” and locate the desired firmware package (firmware_270R.cim) on your computer, and click “Update”.
5. Follow the instructions provided from the software carefully! Do not switch off the camera during the update process, unless specifically requested by the Phocus software.
6. When the update has been finalized, please restart your camera and check that the firmware has been successfully updated.
Important notice:
– Manual updating of firmware is available in the Phocus software, from version 2.7 Mac and 2.7 Windows. However, please use the latest version of Phocus for firmware updating. For Windows it is strongly recommended to use the 64 bit version.
– During the upgrade procedure do NOT disconnect the FireWire cable until prompted!
– Firmware indirme prosedürü sırasında FireWire kablosunun istemeden çıkarılması, en kötü durumda kamerayı işe yaramaz hale getirebilir, bu da yetkili servis ihtiyacını gerektirir.
İndirme