GitUp GIT2 Action Camera Firmware 1.4
Dosya tipi: Firmware.
Işleti̇m Si̇stemi: AnyOS.
Dosya adı: GIT2FW_20160324.zip.
Bit: 32/64 Bit.
Li̇sans: Ücretsiz.
Açıklama
Bu paket, GitUp GIT2 Action Camera Firmware sürüm 1 in gerekli kurulum dosyalarını sağlar.4.
New features:
– 4:3 video mode, 1440*1080 60fps video resolution.
– Support remote shutter through HDMI port with special cable
– Video recording pause and resume via Menu button
– Video Time Lapse: 1F/2Sec
– Fast-forward clips during playback through a list of 1X, 2X, 4X, 8X via menu button
– Video Bitrate options for below modes: 1080P 60fps, 1440P 30fps, 1296P 30fps, 2160P 24fps, 1080P 30fps;
– Desteği sensor calibration (fixing hot pixels) by user.
– Video shutter speed option: Auto, 1/30s, 1/60s, 1/120s, 1/240s, only works while ISO is not set for Auto;
– Lock Actual Recording via Menu button
– Photo time lapse: 0.5s option Added: Polish and Dutch language, improved Portugal, French, Spanish, Italian, German translation
İyileştirmeler:
– Delete the firmware after upgrade new firmware.
– Changed Custom AWB adjustment range from 0-9 to 0-19
– Soft and Strong sharpness, close to the normal option
– Front red LED will be blinking for last 3 seconds while taking self-timer photo (When you see the red Led blinking, it is time to smile)
– No Wi-Fi info displayed while OSD off;
– Do not auto start recording if powered on by battery on car DVR mode;
– Removed 1s overlap; Improved: Support real 240fps;
– Update the web camera name to Git2 instead of DEMO1
– Display shutter speed option on screen on photo mode
– Improved: LED blinking as normal recording and update the video mode icon on video time lapse mode
Düzeltmeler:
– No audio while playback on TV via HDMI
– The date is not shown properly in the preview mode
– Quick start capture is not working while connected with external charger.
– Unmute Recording Audio issue by menu button
– Video shaking on 720P 30fps mode with Gyro on
– Camera frozen while taking 16MP in 10 sequences burst mode
– Top and Front LED blinking on Car DVR mode
Kurulum adımları:
1. Use max. 32GB card formatted by camera or on computer as FAT32
2. Insert card in camera and connect it to computer using USB cable
3. Copy just the GIT2LD.bin on the root of the card
4. After GIT2LD.bin is copied to the card disconnect the camera from computer
5. Reconnect the camera to your computer and wait few seconds until you can chose Mass Storage from camera menu
6. Delete GIT2LD.bin from the card using your PC and
7. Copy the GIT2FW.bin file on the root of the card
8. Reconnect the camera to your computer and wait more seconds until you can chose Mass Storage from camera menu, the front green LED and back red LED will be blinking while upgrading.
Önemli uyarı:
– If you camera firmware version is V1.2 or earlier, please upgrade the loader GIT2LD.bin first.
– If you have already installed the V1.3 firmware, no necessary to upgrade the loader, please ignore the #3–#6 steps.
– From V1.4 firmware, the firmware will be automatically deleted from Micro SD card after upgrade completed.
İndirme