DFI KT600-AL PCB A BIOS 1.4

Özellikler:

– CPU
AMD Athlon XP 266/333/400MHz FSB 
AMD Athlon 200/266MHz FSB 
AMD Duron 200/266MHz FSB 

– CPU Socket
Socket A

– Chipset
VIA chipset
North bridge: VIA KT600
South bridge: VIA VT8237

– Memory
Three 184-pin DDR SDRAM DIMM sockets
Supports up to 3GB memory (unbuffered DIMM)
Uses PC1600 (DDR200), PC2100 (DDR266), PC2700 (DDR333) or PC3200 (DDR400) DDR SDRAM DIMM, 2.5V type

– BIOS
Award BIOS
2Mbit flash memory

– Power Management
Supports ACPI STR (Suspend to RAM) function
Wake-On-Events include:
Wake-On-PS/2 Keyboard/Mouse
Wake-On-USB
Wake-On-Ring
Wake-On-LAN
RTC timer to power-on the system

– Hardware Monitor
Monitors CPU/system temperature and overheat alarm
Monitors 12V/ 5V/3.3V/CPU/VBAT(V)/5VSB(V) voltages 
Monitors CPU/system fan speed
Read back capability that displays temperature, voltage and fan speed
CPU Fan Protection function during system boot-up
CPU Temperature Protection function during system boot-up

– Audio
AC’97 2.2 S/PDIF extension compliant codec
S/PDIF-in/out compressed digital output
6-channel audio output

– LAN
VIA 6103 LAN Phy
Full duplex support at both 10 and 100 Mbps

– USB
Supports 8 USB 2.0 (480Mb/second) / USB 1.1 (12Mb/second) interfaces.

– IDE
Supports ATA/33, ATA/66, ATA/100 and ATA/133 hard drives
UDMA Modes 3, 4, 5 and 6 Enhanced IDE (data transfer rate up to 133MB/sec.)

– Serial ATA with RAID
Supports two SATA (Serial ATA) interfaces which are compliant with SATA 1.0 specification 
(1.5Gbps interface)
Supports RAID 0, RAID 1 and JBOD

– AGP
Supports AGP 8x up to 2133MB/sec. and AGP 4x up to 1066MB/sec. bandwidth for
3D graphics applications

– Rear Panel I/O Ports
1 PS/2 mouse port
1 PS/2 keyboard port
4 USB 2.0/1.1 ports
1 LAN port
2 DB-9 serial ports
1 DB-25 parallel port
3 audio jacks: line-out, line-in and mic-in

– I/O Connectors
2 connectors for 4 additional external USB 2.0/1.1 ports
1 front audio connector for external line-out and mic-in jacks
2 internal audio connectors (AUX-in and CD-in)
1 surround connector
1 S/PDIF-in/out connector
2 SATA connectors
2 IDE connectors
1 floppy connector
1 ATX power supply connector
2 fan connectors

– Expansion Slots
1 AGP slot
5 PCI slots
PCB