Dell LITEONIT Solid State Drive Firmware HM7110E/A03
Dosya tipi: Firmware.
Işleti̇m Si̇stemi: Windows 10, Windows 7, Windows 8, Windows 8.1.
Dosya adı: LMT-128L9M-HM7110E_ZPE.exe.
Bit: 64 Bit.
Li̇sans: Ücretsiz.
Açıklama
Bu paket, LITEONIT LMT-128L9M mSATA 128GB, Revision HM7110e, and is supported on Inspiron, Latitude, Precision and XPS models için bellenimi sağlar.
Fixes & Enhancements
– Improves compatibility with low power mode
Windows yardımcı programı aracılığıyla bellenim yükseltmesi
ATTENTION
1. Backup the user data in Solid-State Drive.
2. Switch to AC Power.
3. Put targeted SSD which want to be flashed FW as slave drive or use it as external storage device drive via the USB port.
4. New FW only can be actived after reboot or power reset.
5. This utility can face flash FW by the same FW version SSD, that is it will face flash FW HMx110E/HM9110F/6M8410D again if the FW in target SSD is HMx110E/HM9110F/6M8410D already.
Procedure
1. Run the utility contained therein to start firmware update process.
2. On the first screen, if the target SSD is not listed, select it and then Click “Update”.
3. The next screen is a warning message. It states the risks and reminds user to backup important files before proceeding. Please click OK to proceed.
4. Firmware upgrade will proceed. When the firmware upgrade process completes, the user will be prompted to reboot the machine. Please close all open applications and save your work before rebooting your machine.
5. The system will reboot and load the firmware. Once the firmware update is complete (screen will show firmware update done), you can boot into Windows.
6. To confirm the firmware update was successful, open Device manager – open SSD – click Properties – choose hardware ID under Details and check the firmware version.
İndirme