Thecus N5550 NAS Server Firmware 2.06.03.1.9878 Beta
Tipo de arquivo: Firmware.
Sistema operacional: AnyOS.
Nome do arquivo: Thecus_x86_64_FW.2.06.03.1_build9878_N5810_N7710_N7770_N8810_N8880_N6850_N8850_N10850_N8900_N12000_N12850_N16000_N16850.rom.
Bit: 32/64 Bit.
Licença: Grátis.
Descrição
New Features/Changes:
– Add support FBP3001039011 support.
– Improve Amazon S3 –acl-public issue.
– Improve BTRFS ACL & public change.
– Improve BTRFS snapshot restore.
– Improve FTP not depend on SAMBA service.
– Improve IPMI client OOM.
– Improve LSI HBA OOM.
– Improve NFS server while booting.
– Improve restore user account/password, and also restore admin password.
– Improve RSYNC encryption.
– Improve SNMP. (V2.06.03.1)
– Improve System Failover switch to Standby NAS.
Upgrade firmware:
– Save the downloadable file on your computer.
– Login as admin from web interface to your Thecus NAS with 64bit firmware.
– In the [System Management] menu, choose the [Firmware upgrade] item and the firmware upgrade.
– Press button and select the firmware you downloaded.
– Press [Apply] and the confirm window will pop up. Please select [Next] button twice to confirm the process, and start firmware upgrade. The entire upgrade takes about 3 minutes. After the firmware is upgraded, Thecus NAS will beep for 3 seconds.
– NOTA: If your browser is set to cache the screen, please press CTRL-F5 in your browser to reload from server instead of from browser’s cache.
– During firmware upgrade process, you will see a progress bar indicating the completeness.
– NOTA: During firmware upgrade process, it is imperative that user do not turn off the power to Thecus NAS or close the browser. This will lead to catastrophic result.
– Just in case, the upgrade process failed, please DO NOT restart or shutdown the NAS. Go back and upgrade the firmware again.
– After the firmware is upgraded, you will see a message ask admin user to reboot. Please reboot to finish the upgrade process.
– After click [Reboot], the system will redirect to [Shutdown / Reboot] page, you may select the NAS to shutdown or reboot.
– NOTA: After reboot the Thecus NAS, please go to [System Management > Config Mgmt] to save your configuration. New version of firmware will not work with configuration file from previous versions of firmware.
Download