Spypoint BF-10HD Camera Firmware 0.2
Tipo de arquivo: Firmware.
Sistema operacional: AnyOS.
Nome do arquivo: BF-10HD_v0.2.zip.
Bit: 32/64 Bit.
Licença: Grátis.
Descrição
Improvement:
– Improve electricity mode.
Installation instructions:
– Updating The Camera Using A SD Card:
– Format the SD card.
– Download the update file
– Open the downloaded .zip file by double-clicking on it.
– Extract the files from the .zip file.
– Copy the extracted files to the SD card, right next to DCIM folder.
– Make sure the camera is turned OFF.
– Insert the SD card into the camera.
– Hold down the “MENU” button and turn ON the camera.
– The display will turn on showing the numbers 0000, 0001, 0002.
– When the numbers go back to 0000 and the LCD screen turns off, you may turn off the camera and release the «MENU» button.
– The camera firmware is now up to date.
To confirm the update was successful:
– Turn OFF the camera.
– Hold down the “DOWN” button.
– Turn ON the camera while holding down the “DOWN” button.
– Check the numbers on the LCD screen. You should see for example: 2n1 XXXX XXXX XXXX V002. The xxxx is the production ID, and the last 2 digits in V002 mean the version is 0.2.
Download