Sound Devices 970 Audio Recorder Firmware 2.30
Tipo de arquivo: Firmware.
Sistema operacional: AnyOS.
Nome do arquivo: 970-firmware.
Bit: 32/64 Bit.
Licença: Grátis.
Descrição
Novo:
– File copy function: Allows user to copy a file from one drive to another via File List or PIXNet.
– Reel copy function: Allows user to copy a folder from one drive to another via File List or PIXNet.
Alterar:
– Headphone solo is no longer rippled through to other units in the group.
Fixo:
– Rare Media Too Slow Errors immediately after initiating Record when recording audio.
Firmware Installation Instruction
– Sound Devices recommends backing up any existing data that may reside on the recorder. While no data on the storage is changed during the update process, it is best practice to back up the unit. It is also highly recommended to save the current device settings since a firmware update can result in settings changing to factory default.
– Faça o download do firmware .zip file.
– From the zip archive, extract the .prg file.
– Copy the .prg file to the root level of an SSD in a PIX-CADDY, CF memory card or HDD. The card or SSD must be formatted as an exFAT volume. (The storage medium should be formatted by PIX/970.)
– Power the recorder from external DC. Do not perform the update with an unstable power source.
– Insert the SSD , CF card or HDD with the .prg file.
– Power on the recorder.
– Once booted, push the MENU button to open the Main Menu. Turn the Control knob to highlight System, and then press the Control knob to select it.
– Turn the Control knob to highlight Update Software, and then press the Control Knob to select it.
– Once a prg has been selected, you will need to reconfirm that the file selected is the correct one. Select Yes to proceed with the firmware update or select No to exit the Software Update. The unit will take a few minutes to update the firmware, indicating its progress. When the update is finished, the unit will present a dialog indicating it will shut down. Accept this dialog to complete the update process.
– A dialog will appear asking: “Are you sure?” Make sure Yes is highlighted, then push in the Control knob to initiate the update. The unit will take a few minutes to update the firmware, indicating its progress. When the update is finished, the unit will present a dialog indicating it will shut down. Accept this dialog to complete the update process.
– Review settings after updating.
Download