SMC SMC2655W Access Point Firmware 1.4i.4
Tipo de arquivo: Firmware.
Sistema operacional: AnyOS.
Nome do arquivo: FW_2655W_FWv14i4.zip.
Bit: 32/64 Bit.
Licença: Grátis.
Descrição
Release History
AP Firmware (V1.4i.4):
– The AP is not reset in the case of the WEP Settings modification.
– The user can set the IP address of the Access Point with the arp –s method only during the first 3 minutes from the moment it starts up
– Fix “ power LED Flash ‘ problem.
APMG Manager (V1.71):
– Add the number of supported SMC2655W Access Point up to 128 units
Limitations & Known Issues
AP Firmware:
– The AP firmware with version 1.4 or above can’t support the old hardware T1.0, which embedded with the AP firmware version V1.3h (V1.3x series version).
– The AP supports the DHCP client function and it has been configured as the default setting. If the AP power on the network without the DHCP server, then the AP will work within the default IP address after approximate 20 seconds.
– The AP can then be found via AP Manager after the AP starts with the IP Address.
– In wireless client, The AP Scan (discovery) function via AP Manager can’t be used to find the associated/linked AP that is located in different IP subnet.
AP Manager:
The AP Scan (discovery) function can’t be used to find the APs that are located
in different IP subnet (segment by router)
Download