Roland AT-100 Music Atelier Firmware 1.20
Tipo de arquivo: Firmware.
Sistema operacional: AnyOS.
Nome do arquivo: at30075_sys_v120.zip.
Bit: 32/64 Bit.
Licença: Grátis.
Descrição
Update Procedure
Note: Never power-off your AT-300 / AT-100 / AT-75 while the update is in progress!
1. Leaving the power to the AT-300 / AT-100 / AT-75 switched off; connect the USB Memory to the “External Memory connector”.
2. Hold down the Rotary Sound [On/Off] and Rotary Sound [Fast/Slow] button and turn on the AT-300 / AT-100 / AT-75. “Updating…” appears on the screen and the update begins. The indicator of the Rotary Sound [On/Off] button will be blinking slowly while updating.
3. When the update completes, the message “Finished.” will appear on the display. Then, the indicators of the Rotary Sound’s [On/Off] and [Fast/Slow] buttons will be blinking quickly. Turn off the power of AT-300 / AT-100 / AT-75 after confirming the update completion.
* The update takes approximately five minutes.
4. Detach the USB Memory and switch off the power to the unit.
Cautions with the Update
– We recommend that you save your user data to a USB memory before you perform the update. If a problem occurs and your user data is lost, you will be able to restore the original state by reloading the data you saved. For details on the procedure, refer to the following sections of the Owner’s Manual.
– Never apply this update data to any product other than the AT-300 / AT100 / AT-75. This update data may destroy the data or system program of other products.
– Never power-off your AT-300 / AT-100 / AT-75 while the update is in progress!
Download