Panasonic WV-SC384 Network Camera Firmware 2.00.126
Tipo de arquivo: Firmware.
Sistema operacional: AnyOS.
Nome do arquivo: sc384_200E_cam_126.zip.
Bit: 32/64 Bit.
Licença: Grátis.
Descrição
Alterar:
– Added FTP transmitting Pre alarm picture.
– Added hyper-link to the “Support Information on network camera (WV Series)” in the page of firmware upgrade.
– Added Audio Output Duration setting so that various durations of audio transmission (such as 1/2/3/5/10/20/30/60min) can be set (instead of 5-min fixed).
– Added “Alarm deactivation time” setting so that various deactivation time (such as 5s/10s/30s/1min/3min/5min/10min) can be set (instead of 5-sec fixed).
– Made possible to choose “BASELINE” or “HIGH” as H.264 Profile by CGI command.
– Improved outputting frame rate while setting Max. bit rate were lower value in Advance Variable Bit Rate (AVBR).
– E-mail notification can attach an image when recording video is in use.
– In ONVIF, supported Video Source Mode (Image Capture Mode) command.
– In ONVIF, supported Audio Back Channel over HTTP.
– By CGI command, unable to obtain the desired MP4 file(s) only but also all associated MP4 files will be obtained. In a case, the subject were a certain specific brightness.
– Fixed only desired MP4 file(s) to be obtained.
– Unable to set durations of pre-alarm and postalarm recordings. Set H.264(2) to “OFF” while recording H.264(1) onto SD memory card.
– Fixed to set the durations.
– Time stamp information may not be on the stream. When error occurred at H.264 video transmission.
– Fixed to the stream contains time stamp information.
– Improved the returning of CGI command (/cgi-bin/find_recording_seqs) would contain “Content-Length”.
Download