Panasonic WV-S6530N Network Camera Firmware 1.91
Tipo de arquivo: Firmware.
Sistema operacional: AnyOS.
Nome do arquivo: s6530_191ES.zip.
Bit: 32/64 Bit.
Licença: Grátis.
Descrição
Changes/Correções:
– Solid black screen may be appear during sequencing with the network disk recorder due to it takes time to output the video.
– SD memory backup recording did not stop. By turning power on / off while SD memory backup recording during connecting with the network disk recorder.
– Camera may reboot, unexpectedly. When sequencing the network disk recorder and or the video management software (WV-ASM series) with “SD memory backup” enabled simultaneously. By downloading the SD memory backed up data with the network disk recorder
– Recording may not retain when restarting camera. Recording may not stop at restoration of communication. In an environment where the communication state is unstable
Updating a camera’s firmware
– Download the latest firmware file and save it on your PC.
– Click the [Maintenance] tab.
– On the left side of the screen under [Maintenance], click [Update Firmware].
– Click [Update Firmware]. The camera will automatically restart.
– After the camera restarts, a dialog prompts you to select the firmware file.
– Click [Browse…]. A dialog prompts you to specify the location of the firmware file.
– Select the firmware file you downloaded from the Panasonic Network Camera website and click [Open]. The selected file name is displayed.
– Confirm the file name, then click [Update Firmware].
– The [Updating firmware.] screen is displayed, and then the [Restarting now…] screen is displayed.
– When the firmware update is complete, the camera’s top page is displayed.
– You can confirm the camera’s firmware version on the top page.
– Confirm the camera’s new firmware version on the top page.
– Do not turn off the power during a firmware update.
– All images buffered in the internal memory are deleted when the firmware is updated.
– All alarm logs are deleted when the firmware is updated.
– You can also use the Setup Program to update the camera’s firmware.
– The camera’s current firmware version can be confirmed on the [Top] page and the [Status] page.
– It might take ten minutes or more to update the firmware according to the network conditions.
Download