DIY-Thermocam Firmware 1.13
Tipo de arquivo: Firmware.
Sistema operacional: AnyOS.
Nome do arquivo: DIYThermocam_1.13.zip.
Bit: 32/64 Bit.
Licença: Grátis.
Descrição
Correções:
– Improved fault detection on first startup
– Small bugfixes
UPGRADE FIRMWARE:
1. Download and extract the firmware updater from the download section of the website.
2. Download and extract the newest firmware from the download section of the website.
3. Download, extract and install the device driver from the download section of the website.
4. Connect the DIY-Thermocam to your computer with the enclosed USB cable and turn it on. If this is the first time you connected it to your PC, wait for the driver installation to be completed.
5. The updater requires Microsoft .NET Framework 4.0 or greater.
6. Run the “Updater.exe” from the extracted archive. The updater needs internet access to update the available firmware versions.
7. Click “Open Firmware” and select the firmware version you want to flash to the device.
8. Press “Flash Firmware” and confirm the prompt with “Yes”.
9. When the DIY-Thermocam is connected to your PC and is tuned on, confirm the next prompt with “OK”. The firmware flash procedure should start automatically.
10. During the update, do not touch the USB cable or turn the device off. Once the update is complete, the DIY-Thermocam will do a reboot with the new firmware.
11. Enjoy the new features of the updated firmware.
Download