Canon EOS C100 Mark II Camera Firmware 1.0.2.1.00
Tipo de arquivo: Firmware.
Sistema operacional: AnyOS.
Nome do arquivo: c100mk2-v1021-win.zip.
Bit: 32/64 Bit.
Licença: Grátis.
Descrição
The present firmware incorporates the following changes:
The following features are enabled when these lenses are attached: CN7x17 KAS S/E1, CN-E18-80mm T4.4 L IS KAS S, or CN20x50 IAS H/E1:
– Enables autofocus using the Dual Pixel CMOS AF function. (Not applicable to the CN20x50 IAS H/E1 lens)
– Enables the joystick on the camera’s grip unit to be set to operate the zoom.
– Enables control of iris to be set to manual operation, and control of focus, zoom and iris using the separately-sold Remote Controller RC-V100.
– Enables automatic aperture and push auto iris functions.
– Enables retrieval of metadata, such as the model name and the focal distance of the lens attached, and display of metadata on the camera.
Adds peripheral illumination correction for the following lenses:
– COMPACT-SERVO lenses: CN-E18-80mm T4.4 L IS KAS S
– CINE-SERVO lenses: CN20x50 IAS H/E1
– EF lenses: EF 35mm f/1.4L II USM, EF 50mm f/1.8 STM and EF-S 18-135mm f/3.5-5.6 IS USM
– Enables the built-in monaural microphone to be set to Off.
IMPORTANT: Precautions for updating the firmware
– If the firmware update is not performed correctly, the camera may stop working.
– All camera settings will be reset formatted when you perform the firmware update.
– It is not possible to revert the firmware back to a previous version after you have performed the firmware update.
– Please be absolutely sure NOT to operate the camera buttons or remove the camera’s power source during the firmware update. Doing so may cause the camera to malfunction.
Instruções de instalação:
– Salve e descompacte o arquivo para download.
– Insert the SD card into the camera’s SD card slot, and close the card cover.
– Slide the Power switch to CAMERA.
– After pressing the MENU button, open the [Initialize Media] submenu.
– Select [SD Card] and then press SET.
– Select [Complete] (complete initialization) and then press SET.
– When you select [OK] and then press SET, complete initialization of the SD card will start.
– When the confirmation message appears, press SET.
– Press the MENU, and slide the Power switch to OFF, and then remove the SD card from the camera.
– Copy the firmware update data to the SD card
– Insert the SD card prepared into the camera’s SD card slot.
– Slide the Power switch to CAMERA.
– After pressing the MENU button, open the camera firmware submenu.
– [System Setup] [Firmware] [Camera]
– The firmware update confirmation screen will be displayed.
– When you select [OK], the firmware update will start.
– After the update ends, the camera will restart automatically, and a firmware update completion screen will be displayed.
– When you select OK, all settings will be reset and the [Date/Time] screen will appear. Set the date/time.
– Check that the firmware version has changed to current one.
– Press the MENU, and slide the Power switch to OFF, and then remove the SD card from the camera.
Download