Panasonic AK-UCU500ES Camera Control Unit Oprogramowanie 4.21
Typ pliku: Oprogramowanie.
System Operacyjny: AnyOS.
Nazwa pliku: VSI6159J.zip.
Bit: 32/64 Bit.
Licencja: Darmowa.
Opis
Zmiany:
– There was a case under the following conditions in which the video images for monitoring on VF are mixed with the previous frames. This problem was improved.
– The input signal is 1080/59i, 1080/50i, 1080/59p, 1080/50p, 720/59p or 720/50p format.
– MENU: FS_MODE: OFF
– The return input signal is delayed behind the allowance.
– The delayed allowance of the input signal is improved to increase. In addition, if the delay exceeds the allowance the frame synchronization function turns on.
Metoda wyświetlania wersji:
– Connect the picture monitor to [8/PM] of HD/SD SDI OUT connector.
– Hold down the MENU button. The TOP menu screen of CCU menu appears and the MENU button lights.
– Select “MAINTENANCE” and press the SELECT dial button to open the MAINTENANCE menu screen.
– Select “VERSION” and pressing the SELECT dial button, VERSION screen is displayed.
– Each software version is displayed on the VERSION screen as follows.
Update procedure:
– Connect the picture monitor TV to [8/PM] of HD/SD SDI OUT connector.
– Insert a SD memory card into the SD memory card slot.
– Hold down the MENU button. The TOP menu screen of CCU menu appears and the MENU button lights.
– Select “MAINTENANCE” and press the SELECT dial button to open the MAINTENANCE menu screen.
– Select item “SD CARD” and press the SELECT dial button to open the SD CARD menu screen.
– Select the item “UPDATE” and set “YES?”(Character is blink).
– Pressing the SELECT dial button, update program is started and following message is displayed.
– Software update may take approx. 2 hours if the all FPGA and CPU are needed to be updated. Nie wyłączaj podczas aktualizacji.
– When the update is completed, the message “UPDTAE COMPLETE” is displayed and CCU will be automatically rebooted
Pobierz