Panasonic AK-UCU500ES Camera Control Unit Firmware 4.21
Tipo de archivo: Firmware.
Sistema Operativo: AnyOS.
Nombre del archivo: VSI6159J.zip.
Bit: 32/64 Bit.
Licencia: Gratuito.
Descripción
Cambios:
– There was a case under the following conditions in which the video images for monitoring on VF are mixed with the previous frames. This problem was improved.
– The input signal is 1080/59i, 1080/50i, 1080/59p, 1080/50p, 720/59p or 720/50p format.
– MENU: FS_MODE: OFF
– The return input signal is delayed behind the allowance.
– The delayed allowance of the input signal is improved to increase. In addition, if the delay exceeds the allowance the frame synchronization function turns on.
Método de visualización de la versión:
– Connect the picture monitor to [8/PM] of HD/SD SDI OUT connector.
– Hold down the MENU button. The TOP menu screen of CCU menu appears and the MENU button lights.
– Select “MAINTENANCE” and press the SELECT dial button to open the MAINTENANCE menu screen.
– Select “VERSION” and pressing the SELECT dial button, VERSION screen is displayed.
– Each software version is displayed on the VERSION screen as follows.
Update procedure:
– Connect the picture monitor TV to [8/PM] of HD/SD SDI OUT connector.
– Insert a SD memory card into the SD memory card slot.
– Hold down the MENU button. The TOP menu screen of CCU menu appears and the MENU button lights.
– Select “MAINTENANCE” and press the SELECT dial button to open the MAINTENANCE menu screen.
– Select item “SD CARD” and press the SELECT dial button to open the SD CARD menu screen.
– Select the item “UPDATE” and set “YES?”(Character is blink).
– Pressing the SELECT dial button, update program is started and following message is displayed.
– Software update may take approx. 2 hours if the all FPGA and CPU are needed to be updated. No apagar mientras se actualiza.
– When the update is completed, the message “UPDTAE COMPLETE” is displayed and CCU will be automatically rebooted
Descargar