Xwrt-Vortex Firmware 380.62 per Huawei WS880
Tipo di file: Firmware.
Sistema Operativo: AnyOS.
Nome del file: WS880_380.62_0.zip.
Bit: 32/64 Bit.
Licenza: Gratis.
Descrizione
Xwrt-Vortex is a port of Asuswrt-Merlin for different routers developed by Vortex. Xwrt-Vortex retains all the features of the original stock Asus firmware.
Installation:
Simply flash it like any regular update. Non è necessario ripristinare le impostazioni di fabbrica. You can revert back to an original Asus firmware at any time just by flashing a firmware downloaded from Asus’s website.
NOTA:
resetting to factory default after flashing is strongly recommended for the following cases:
– Updating from a firmware version that is more than 3 releases older
– Switching from a Tomato/DD-WRT/OpenWRT firmware
If upgrading from anything older and you experience issues, then consider doing a factory default reset then as well. Always read the changelog, as mandatory resets will be mentioned there when they are necessary.
In all of these cases, do NOT load a saved copy of your settings! This would be the same thing as NOT resetting at all, as you will simply re-enter any invalid setting you wanted to get rid of. Make sure to create a new backup of your settings after reconfiguring.
I cambiamenti:
– NEW: Added nano 2.7.0 (user-friendly text editor). Note that for space reasons, some of its features are disabled for the RT-N66U and RT-AC66U. Entware users might want to uninstall the Entware version if they had it installed and want to use the built-in version instead.
– NEW: Option to toggle the display of passwords on the PPTPD and OpenVPN server pages.
– NEW: Allow providing a vendor class on the WAN page (DHCP option 60)
– NEW: Add option to disable sending a RELEASE request when odhcp6c exits, allowing you to retain your received prefix with some ISPs.
– CHANGED: Updated nettle to 3.2 (used for dnssec) and increased optimization level.
– CHANGED: Updated minidlna to 1.1.6
– CHANGED: Updated OpenVPN to 2.3.12
– CHANGED: Updated OpenSSL to 1.0.2i
– CHANGED: Revamped the Wireless Log page: Merged some columns to gain more horizontal space, Longer hostname shown (truncated names are now shown in a tooltip), Display clients’ IPv6 if they have one
– CHANGED: Accept up to 250 characters for OpenVPN client’s username and password (one provider needs 64).
– CHANGED: Hide the WPA key on the Wireless config page, and only reveal it when you click on the field to edit it.
– FIXED: OpenVPN client shouldn’t display policy routing settings when using a TAP interface.
– FIXED: DSL/ATM overhead setting was visible on MIPS models, which don’t support it.
– FIXED: Editing OpenVPN or PPTP users with any value larger than 32 chars could lead to corruption of the user list.
– FIXED: Custom config file for igmpproxy wasn’t working.
– FIXED: After turning off a Guest network, the next visit to the Wireless Settings page would show that guest network’s settings instead of the parent band settings (Asus bug)
– FIXED: Smart Connect rules didn’t apply on the RT-AC88U (backported fix from 380_3941).
– FIXED: Numerous memory leaks in the networkmap service. (Asus bug)
– FIXED: Potential buffer overrun in the networkmap service. (Asus bug)
– FIXED: Broken IPv6 connectivity if enabling SSH brute force protection (only MIPS models were affected)
– FIXED: DHCP lease renewals would fail with ISPs with a broken DHCP server that sent replies from a different IP address.
– FIXED: 5G LED would fail to turn back on when exiting stealth mode.
– FIXED: Only hostname was used as remote server in an exported OpenVPN client config when using Namecheap DDNS.
– FIXED: Security vulnerability (XSS/CSR) in httpd (backported fix from 380_4005).
– FIXED: Chrome would try to auto fill some fields (such as on the DDNS configuration page), which could be problematic.
– FIXED: IPTraffic database was no longer properly named after the router’s MAC address on the AC88/AC3100/AC5300. If you recently enabled it, you will need to either re-create a new database, or rename the existing database from tomato_cstats_000000000000.gz to tomato_cstats_XXXXXXXXXXXX.gz, where “XXXXXXXXXXXX” is your MAC as found with “nvram get et2macaddr”, in lowercase (AC88/AC3100/AC5300 only). Regular traffic monitoring (stored in tomato_rstats_XXXXXXXXXXXX.gz) is fine.
Note di installazione:
– Questo firmware personalizzato può essere applicato come qualsiasi normale aggiornamento.
– Non è necessario ripristinare le impostazioni di fabbrica.
– È possibile ripristinare il firmware ASUS originale in qualsiasi momento.
– Non caricare una copia salvata delle impostazioni.
Download